Location And Frequency - Ricoh fi-8040 Operator's Manual

Location and Frequency

Location
Inside of the scanner (ADF)
Outside of the scanner
The inside of the scanner (ADF) needs to be cleaned regularly for every certain number of sheets
scanned. The scanner records the number of sheets scanned so that you can check the number of
sheets scanned after you cleaned it last.
Use one of the following methods to check the number of sheets that have been scanned.
● The procedure when using the touch screen is as follows.
1
On the touch screen, press
2
On the [Consumable counters] screen, check the value for [After cleaning].
- When the background color of the counter is yellow
It is about time to clean the scanner.
- When the background color of the counter is red
It is time to clean the scanner. Clean the scanner.
● When using the Software Operation Panel, refer to
ATTENTION
Cleaning cycles may vary depending on the condition of the documents. Also, cleaning must be
performed more frequently when the following types of documents are scanned:
● Smooth-faced documents such as coated paper
● Documents with printed text/graphics that almost cover the entire surface
● Chemically-treated documents such as carbonless paper
● Documents containing a large amount of calcium carbonate
● Documents written in lead pencil
Brake roller
Pick roller
Rubber idler roller
Plastic idler roller
Glass
Ultrasonic sensor
Feed roller
Eject roller
Scanner
Touch screen
→ [Cleaning & Maintenance] → [Consumable counters].
Checking the Sheet Counters (page
152
Frequency
Every 3,000 sheets
Clean when dust and dirt are
noticeable.
Daily Care
322).