Ricoh fi-8040 Operator's Manual page 82

Load the document face-down in the ADF paper chute (feeder).
For details, refer to How to Load Documents (page
4
On the touch screen, press the [Perform Job] button.
5
Select the job to be processed from the [Select Job] screen.
HINT
● When adding, changing, or deleting jobs, refer to
146).
● If no job is registered, the screen to confirm whether to add a job is displayed. Press the [Yes]
button to add a job.
6
In the [Ready to scan] screen, press the [Scan] button.
Scanning starts.
HINT
● If you want to change the scan settings temporarily for just this time, press
the settings.
For details about the scan settings, refer to
● When [Continue scanning] is enabled in the scan settings, the [Scan] button appears on the
[Ready to scan] screen after scanning is complete.
To continue scanning documents, load the documents in the ADF paper chute (feeder) and
press the [Scan] button.
7
When the [Complete Scan] button appears after scanning, press the button.
88).
Adding/Changing/Deleting a Job (page
Scan Settings (page 260).
82
How to Perform a Basic Scan
to change