Ricoh fi-8040 Operator's Manual page 261

Resolution (dpi)
Specify the resolution for images.
● 150
● 200
● 240
● 300
This is the factory default setting.
Display thumbnails
Select whether to display thumbnails on the touch screen to check images after documents are
scanned.
The factory default setting is set to on.
When this is set to on, the maximum number of sheets that can be scanned at once is 60 sheets in
duplex scanning mode and 120 sheets in simplex scanning mode.
HINT
Thumbnail images are displayed at a lower resolution than the actual images to be saved in a
folder or sent by email.
Use the thumbnails to check whether all the images of scanned documents have been output.
Show the send confirmation screen
Set whether to display a confirmation window before saving images to a folder on the network or
sending them by email after documents are scanned.
The factory default setting is set to on.
Advanced settings
Configure the advanced scan settings to be used when documents are scanned with the scanner.
Clicking [Advanced settings] allows you to specify the following items:
Basic (page 261)
●
Image (page 262)
●
● Page (page 263)
● Paper Feeding (page 264)
● Batch (page 265)
Output (page 267)
●
File Name (page 268)
●
Basic
Paper Size
Set the paper size of documents to be scanned.
● Automatic
DirectScan Settings (Destination/Job/Scan Settings) (Touch Screen)
261