Cleaning & Maintenance - Ricoh fi-8040 Operator's Manual

Cleaning & Maintenance
● Cleaning cycle (page 299)
● Replacement of the Pick Roller (page 299)
Replacement of the Brake Roller (page 299)
●
Maintenance cycle (page 300)
●
Cleaning cycle
Specify the cleaning cycle for the scanner inside.
The background color of the [After cleaning] counter in the [Consumable counters] screen
changes to yellow when the counter reaches 95% of the specified value for this item, and to
red when the counter reaches 100%.
Cycle (x 1000 Sheets)
Specify the cleaning cycle in increments of 1000 sheets.
The factory default setting is "3".
Issue a cleaning time notification
Specify whether or not to display the cleaning instruction message.
When [Issue a cleaning time notification] is set to on, a notification can be displayed on
on the touch screen when the time for cleaning approaches.
The factory default setting is set to off.
Replacement of the Pick Roller
Specify the replacement cycle for the pick roller.
The background color of the [After Replacing the Pick Roller] counter in the [Consumable
counters] screen changes to yellow when the sheet count after replacing the pick roller
reaches 95% of the specified value for this item, and to red when the counter reaches 100%.
In addition, a notification can be displayed on
replacing the pick roller approaches.
Cycle (x 10000 Sheets)
Specify the replacement cycle for the pick roller in increments of 10,000 sheets.
The factory default setting is "20".
Replacement of the Brake Roller
Specify the replacement cycle for the brake roller
The background color of the [After Replacing the Brake Roller] counter in the [Consumable
counters] screen changes to yellow when the sheet count after replacing the brake roller
reaches 95% of the specified value for this item, and to red when the counter reaches 100%.
on the touch screen when the time for
299
Scanner Settings (Touch Screen)