Vertical Streaks Appear On The Images - Ricoh fi-8040 Operator's Manual

Vertical Streaks Appear on the Images

Check the following points
● Are the glass and rollers inside the ADF clean? (page 231)
Do vertical streaks disappear when a lower resolution is specified? (page 231)
●
Is there any foreign matter (such as dust or paper dust) on the document? (page 231)
●
Is [Vertical Streaks Reduction] enabled in the scanner driver for a scan? (page 231)
●
If the problem still persists, check each item in
Provider (page 248)
product. Refer to the contact information in the Contact List if supplied with this product, or
refer to the contact information in the Contact for Inquiries section if provided in Safety
Precautions supplied with this product, and then make an inquiry.
●
Are the glass and rollers inside the ADF clean?
Solution
Clean the dirty parts.
For details, refer to
●
Do vertical streaks disappear when a lower resolution is specified?
Solution
Specify a lower resolution to scan documents.
●
Is there any foreign matter (such as dust or paper dust) on the document?
Solution
Remove any foreign matter off the document.
Foreign matter may get on the glass that is inside the ADF, and cause the image to appear
dirty.
●
Is [Vertical Streaks Reduction] enabled in the scanner driver for a scan?
Solution
Enable [Vertical Streaks Reduction] in the scanner driver, and then perform a scan.
first, then contact the distributor/dealer where you purchased this
Daily Care (page 150).
231
Before You Contact the Scanner Service
Troubleshooting