Directscan; Output Folder Path - Ricoh fi-8040 Operator's Manual

DirectScan

Set this item when the way for use of the scanner is [Use the scanner by itself (DirectScan)].

Output Folder Path

Set save destinations (folders on the network) to which scanned images will be saved when using
DirectScan.
Up to 25 save destinations can be added.
The added save destinations are listed.
Click [Output Folder Path] under [DirectScan] to display the window.
[Register] button
Click this button to add a save destination. The [Register Save Destination] window appears.
[Edit] button
Click this button to change settings of the save destination. The [Edit Save Destination]
window appears.
[Remove] button
Click this button to delete the save destination.
●
[Register Save Destination] Window/[Edit Save Destination] Window
Display Name
Set a name for the save destination.
Enter a display name within 48 characters.
You cannot set the same name as a display name that is already registered.
The space before or after the character string is ignored.
HINT
If the display name contains characters that cannot be displayed on the touch screen of the
scanner (such as environment-dependent characters), the name may not display correctly on
the screen.
Make sure that the entered display name displays correctly on the touch screen.
Destination Setting
Set the type of the save destination.
● Network Directory
This is the factory default setting.
When [Network Directory] is selected, specify the following items:
- Host Name/IP address
The host name, FQDN, or IP address can be set for this item.
The space before or after the character string is ignored.
Network Settings (fi Series Network Settings)
375