Scanner Central Admin - Ricoh fi-8040 Operator's Manual

Scanner Central Admin

Set this item to manage scanners with Scanner Central Admin Server or Scanner Central Admin
Desktop.
Click [Scanner Central Admin] under [Linking with Server] to display the window.
Server Type
● Do not use
Select this when Scanner Central Admin Server and Scanner Central Admin Desktop are not
used to manage scanners.
This is the factory default setting.
● Scanner Central Admin Desktop
Select this when Scanner Central Admin Desktop is used to manage scanners.
● Scanner Central Admin Server
Select this when Scanner Central Admin Server is used to manage scanners.
When [Scanner Central Admin Server] or [Scanner Central Admin Desktop] is selected, specify
the following items:
● Host Name/IP address
The host name, FQDN, or IP address can be set for this item.
The space before or after the character string is ignored.
ATTENTION
Note that an IPv6 address is not supported.
HINT
When entering a host name, the DNS servers need to be set on the scanner.
● Port Number
The factory default setting is "20444".
Network Encryption
Displays whether to encrypt network communications.
[Check connection] button
Check if the scanner can be connected to Scanner Central Admin Server or Scanner Central
Admin Desktop.
[Apply to the scanner] button
Applies the configured settings.
Network Settings (fi Series Network Settings)
401