How to Load Documents
1
Pull out the chute extension according to the length of the documents.
For details, refer to
2
Adjust the stacker according to the length of the documents.
For details, refer to
3
Load documents in the ADF paper chute (feeder).
Load the document face-down in the ADF paper chute (feeder).
ATTENTION
● Remove all paper clips and staples.
● Reduce the number of documents when documents are not fed into the scanner or
overlapped documents are fed.
4
Adjust the side guides to the width of the documents.
Move the side guides so that there is no space between the side guides and the documents.
Setting Up the ADF Paper Chute (Feeder) (page
Setting Up the Stacker (page
88
67).
68).
How to Load Documents