Scanning Images - Ricoh ImageReader FB User Manual

2400 dpi flatbed scanner with 30-bit super color

Table of Contents

The scanner zooms in on the portion of the image selected with the crop box, and displays the enlarged area in the

Prescan window. This enables you to select a smaller portion of the image to scan, while giving you the ability to focus

in on the detail you want to capture. Click the Prescan View checkbox to restore the image in the Prescan window.

Setup

Opens the SCSI diagnostic table so you can check or change the configuration of your scanner.

Scanning images

Scanning images with your ImageReader scanner is a relatively simple process. The steps below walk you through

selecting the appropriate TWAIN source to use (if you are using a PC), and then scanning an image or document. If you

experience problems during any of these steps, please refer to the appendix at the end of this manual, Troubleshooting.

You may need to modify the configuration.

Select the

AIN sour

Select the

Select the TW

Select the

TWAIN sour

AIN source (PC)

AIN sour

Before you can scan with your ImageReader on a PC, you need to tell the application what scanner you are using. The

scanner is referred to as the "source," and you need to select the appropriate source for the application you are using.

Note:

In some cases, an application's User Guide may direct you to use the application's custom "ImageReader'

Note:

driver In these cases, the instructions provided below are inappropriate for that application. Refer to that application's

user guide for scanning instructions.

1 . Start the image editing application software in Windows.

2. Choose Select Source from the File menu.

3. Follow the appropriate instructions for the Windows version you are running.

W W W W W indo

indo

indows 3. 1

indo

ws 3. 1

ws 3. 1 and 3. 1

3. 1

Select Info Scanner.

3-8

ce (PC)

Zoom

Table of Contents