Operations Are Not Possible When Messages Appear - Ricoh 4800WD Operating Instructions Manual

Operations are not possible when messages appear

Problems
"
Updating the des-
tination
list...Please
wait. Specified
destination(s) or
sender's name has
" ap-
been cleared.
pears, and operations are
not possible.
Causes and solutions
The destination list is being updated from the network using
SmartDeviceMonitor for Admin. Depending on the number of
destinations to be updated, there may be some delay before you
can resume operation. Operations are not possible while this mes-
sage is displayed.
Wait until the message disappears. Do not switch off the power
while this message is displayed.
If Your Machine Does Not Operate As You Want
8
85