Reset - Dürkopp Adler 650-10 Service Instructions Manual

4.6.3 Reset

In the submenu Reset, you can reset sewing programs and parameters
to the delivery state. To do this, re-entering the code once is requested
(for reasons of security).
To select the submenu:
1. Use
 The input mask for the code appears on the display.
2. Enter code 25483 using the numeric keys.
 Reset has the following submenus:
Fig. 67: Reset
Reset data
In the submenu Reset data, you can reset all parameters to the delivery
state.
To reset all parameters:
1. Use
2. Press the OK key.
 All programs will be returned to their delivery state.
Reset programs
In the submenu Reset programs, you can delete all the sewing
programs you have created yourself.
Only the standard programs are retained and are returned to their delivery
state.
To delete all the sewing programs you have created yourself:
1. Use
2. Press the OK key.
 All the sewing programs you have created yourself will be deleted.
Reset all
In the submenu Reset All, you can reset all sewing programs and
parameters to the delivery state.
74
/
to select the Reset submenu.
/
to select Reset data.
/
to select Reset programs.
The standard programs will be returned to their delivery state.
Service settings via software (OP3000)
Service Instructions 650-10 - 01.0 - 08/2016