Counter (Counter) Submenu; Reset Data (Reset) Submenu - Dürkopp Adler 867-M PREMIUM Service Instructions Manual

Programming
Calibration of the pedal (Pedal)
Only one value needs to be checked when calibrating the pedal.
To calibrate the pedal:
1. Call up the Service > Calibration > Pedal menu item.
2. Follow the instructions on the display.

20.8 Counter (Counter) submenu

Use this menu item to view the readings of the various counters.
They are intended for information only – no settings can be made.
Abbreviation
P.C.
P.C.D.
S.C.
B.C.

20.9 Reset data (Reset) submenu

Use this submenu to reset the data of the machine. Various settings can
be made for resetting the data. The possibilities are explained in more
detail in the table.
Access is possible only by entering the password 25483 again.
The reset is carried out immediately after selecting a subitem with the
arrow buttons and then pressing OK. There is no further query, and also
there is no message stating that the reset was performed.
To reset the data:
1. Select the Reset parameter.
2. Press the OK button to confirm the selection.
Service Instructions 867-M PREMIUM - 03.0 - 05/2017
Meaning
Piece Counter
Piece counter showing the number of sewing items that the machine
has sewn so far.
Piece Counter Daily
Daily piece counter, showing the number of sewing items that the
machine has sewn since the last reset.
Stitch Counter
Number of stitches that the machine has sewn so far.
Bobbin Counter
Number of stitches that have been sewn with the bobbin since the last
reset.
NOTICE
Property damage may occur!
Data and settings of the machines may be irretrievably lost.
Consider BEFORE the reset exactly which data need to be deleted.
133