Access Bios Setup Utility Menus - Oracle Exadata X10M Service Manual

Function Key
F10
F12

Access BIOS Setup Utility Menus

You can access the BIOS Setup Utility screens from the following interfaces:
• Use a terminal (or terminal emulator connected to a computer) through the serial
port on the back panel of the server.
• Connect to the server using the Oracle ILOM Remote System Console Plus
application.
Reset or power on the server.
1.
For example, to reset the server:
•
•
•
After the server resets, to enter the BIOS Setup Utility, press the F2 key (Ctrl+E
2.
from a serial connection) when prompted and while the BIOS is running the power-
on self-tests (POST).
The BIOS Setup Utility Main Menu screen appears.
Control Key Sequence
Ctrl+S
Ctrl+N
From the local server, press the On/Standby button on the front panel of the
server to power off the server, and then press the On/Standby button again to
power on the server.
Oracle ILOM CLI: type reset /System
Oracle ILOM web interface: click Host Management → Power Control and
select Reset from the Select Action list. Click Save and click OK.
Chapter 18
Accessing the BIOS Setup Utility
BIOS Setup Function
Save and Exit changes.
Activate Network boot.
18-2