Servicing the Temperature Sensor (FRU)
The following section describes how to service the temperature sensor. The temperature sensor
is a field-replaceable unit (FRU). For more information about FRUs, see
Breakdown" on page 19
Ensure that all power is removed from the server before removing or installing the
Caution -
temperature sensor. You must disconnect the power cables before performing this procedure.
The temperature sensor should be removed and replaced only by authorized Oracle
Caution -
Service personnel.
This section covers the following procedures:
"Remove the Temperature Sensor" on page 163
■
"Install the Temperature Sensor" on page 166
■
Related Information
"Disconnect Cables From the Server" on page 58
■
"Remove the Server From the Rack" on page 61
■
"Take Antistatic Measures" on page 61
■
Remove the Temperature Sensor
Prepare the server for service.
1.
a.
Power off the server and disconnect the power cords from the power
supplies.
See
"Powering Down the Server" on page
and
"Field-Replaceable Units" on page
53.
"Illustrated Parts
22.
Servicing the Temperature Sensor (FRU)
163