Servicing The Temperature Sensor (Fru); Remove The Temperature Sensor - Oracle X7-2L Service Manual

Servicing the Temperature Sensor (FRU)

The following section describes how to service the temperature sensor. The temperature sensor
is a field-replaceable unit (FRU). For more information about FRUs, see
Breakdown" on page 20
Ensure that all power is removed from the server before removing or installing the
Caution -
temperature sensor. You must disconnect the power cables before performing this procedure.
The temperature sensor should be removed and replaced only by authorized Oracle
Caution -
Service personnel.
This section covers the following procedures:
"Remove the Temperature Sensor" on page 173
■
"Install the Temperature Sensor" on page 176
■
Related Information
"Troubleshooting Using the Server Front and Back Panel Status Indicators" on page 28
■

Remove the Temperature Sensor

1. Prepare the server for service.
a. Power off the server and disconnect the power cords from the power
supplies.
See "Powering Down the Server" on page
b. Extend the server into the maintenance position.
See "Extend the Server to the Maintenance Position" on page
and "Field-Replaceable Units" on page
53.
"Illustrated Parts
22.
60.
Servicing the Temperature Sensor (FRU) 173