About This Manual - Thermo Scientific Vanquish VH-D10 Operating Manual

1 • Using this Manual
1.1

About this Manual

Page 12
This manual describes the functional features and operating principle of
your Vanquish™ device and provides instructions for installation, set up,
start up, shut down, operation, maintenance and troubleshooting.
This manual also contains safety messages, precautionary statements,
and special notices. Follow these properly to prevent personal injury,
damage to the device, or loss of data.
Note the following:
• The device configuration may vary; therefore, not all descriptions
necessarily apply to your particular device.
• If some detail applies to only one model or variant, the model or
variant is identified by name.
• Illustrations in this manual are provided for basic understanding.
They can vary from the actual model of the device or component.
However, this does not influence the descriptions. No claims can be
derived from the illustrations in this manual.
The detector is referred to as module, device, detector or diode array
detector in this manual. If other detector types are referenced, they are
identified by name.
The descriptions in this manual assume that the device is installed in the
Vanquish system stack. If this is not the case, additional hardware is
required and must be ordered separately. The information in this
manual applies correspondingly.
Diode Array Detectors (VH-D10)
Operating Manual