Thermo Scientific Vanquish VH-D10 Operating Manual page 152

7 • Maintenance and Service
Page 152
3. Slightly tilt the door to the outside, away from the housing, and
remove the door.
4. To install the door, align the door with the hinges on the housing. Do
not clamp tubing or capillaries between the door and the enclosure.
5. Insert the hinges in the groove, by pushing up and slightly turning
the door.
6. Push the door downward to lock it in place.
You can close the door only when it is properly installed.
Diode Array Detectors (VH-D10)
Operating Manual