Unpacking - Thermo Scientific Vanquish VH-D10 Operating Manual

4 •

Unpacking

4.1 Unpacking
Damaged Packaging, Defective on Arrival
Unpacking the Device
Tools required
Follow these steps
Page 42
Inspect the shipping container for signs of external damage and, after
unpacking, inspect the device for any signs of mechanical damage that
might have occurred during shipment.
If you suspect that the device may have been damaged during shipment,
immediately notify the incoming carrier and Thermo Fisher Scientific
about the damage. Shipping insurance will compensate for the damage
only if reported immediately.
CAUTION—Heavy Load, Bulky Device
The device is too heavy or bulky for one person alone to handle safely.
To avoid personal injury or damage to the device, observe the following
guidelines:
• Physical handling of the device, including lifting or moving, requires
a team effort of two persons.
• A team effort is in particular required when lifting the device into
the system stack or when removing it.
• Use the carrying handles that were shipped with the device to move
or transport the device. Never move or lift the device by the front
doors. This will damage the doors or the device.
TM
Screwdriver, Torx T20
1. Place the shipping container on the floor and open it.
2. Remove the ship kit from the shipping container.
Diode Array Detectors (VH-D10)
Operating Manual