Thermo Scientific Vanquish VH-D10 Operating Manual page 56

5 • Installation
Parts required
Preparations
Page 56
Flow cell
Figure 10: Front side of the flow cell
No. Description
1 Outlet (OUT) (closed with plug during storage and transport)
2 Inlet (IN) (closed with plug during storage and transport)
3 Flow cell label
4 Rotating locks (unlocked position)
1. On the interior front of the device, turn the rotating locks on the
cover of the flow cell opening counterclockwise until they are in a
horizontal position.
2. Remove the cover from the flow cell opening. Keep the cover to
close the flow cell opening when no flow cell is installed in the
device.
NOTICE—Flow Cell Opening
The optical ports and the contact pad for the identification chip in the
flow cell opening are sensitive to electrostatic discharge, contamination
and scratches.
Do not touch any surfaces or optical ports in the flow cell opening.
Diode Array Detectors (VH-D10)
Operating Manual