Thermo Scientific Vanquish VH-D10 Operating Manual page 63

Installing the rotating plug
Diode Array Detectors (VH-D10)
Operating Manual
3. To secure the capillary, push the capillary into the slit of the plug.
Figure 19: Capillary installed in the plug with slit
1. On the detector partition panel, push the rotating plug in the
required recess of the partition panel (if not present yet).
2. To open the plug in order to route the capillary through the plug,
turn the rotating plug toward the front.
3. To secure the capillary, turn the rotating plug toward the partition
panel to close the opening of the rotating plug.
Figure 20: Using the rotating plug
5 • Installation
Page 63