5.5.2
Connecting the Device
Device Connectors
Diode Array Detectors (VH-D10)
Operating Manual
The following connectors are provided on the device:
Figure 9: Electrical connectors on the right side of the device
No.
Description
1
Rating plate, indicating the serial number, part number, module name,
revision number (if any), and the line and fuse rating.
2
Main power switch (on/off control)
3
Fuse holder
4
Power-inlet connector
5
System Interlink port
Allows power on/off control for the device from the Vanquish system base
and device communication and synchronization between the device and
other modules in the Vanquish system.
For example, the interconnection between autosampler and device
automatically enables direct synchronization of sample inject and data
acquisition start in the device. As a result, the synchronization improves the
retention time reproducibility.
6
USB hub ("A" type connector)
Allows connection to other modules in the Vanquish system
7
USB (Universal Serial Bus) port ("B" type connector)
Allows connection to other modules in the Vanquish system or the
computer on which the data management system is installed, such as the
Chromeleon software
5
•
Installation
Page 53