Thermo Scientific Vanquish VH-D10 Operating Manual page 57

Follow these steps
Diode Array Detectors (VH-D10)
Operating Manual
Figure 11: Flow cell opening on the device
No. Description
1 Contact pad for flow cell identification chip
2 Optical ports in the device
3. Unpack the cell.
1. Remove the shipping locks carefully on the left and right rear side of
the flow cell.
TIP Store the shipping locks in the cell packaging to have them easily
available when storing or shipping the cell.
Figure 12: Rear side of the flow cell
No. Description
1 Identification chip
2 Optical ports on the flow cell (on both sides of the flow cell)
The ports are very sensitive and must not be touched.
3 Shipping locks
To protect the flow cell during storage and transport.
4 Light pipe
5 • Installation
Page 57