HEIDENHAIN MSE 1000 Operating Instructions Manual page 98

8
Commissioning and preparing to measure
8.3 Channel setup
To view channel setup options:
Click the Setup button.
Select a channel from the Tree.
The Channel setup tab for the selected channel appears in the Setup screen.
Assign 1 V
1 V and TTL encoder types are selected from a graphic list located on the right
PP
side of the Setup screen content area when the Channel tab is selected.
Available 1 V
Length gauge
Linear encoder
Rotary encoder
To assign a 1 V
Click and hold on the desired encoder graphic located in the graphic list.
Available channels appear as labeled green squares below the module graphic in
the Channel tab.
Drag the selected encoder graphic over the desired channel square and release
the button.
The selected encoder graphic appears below the module with a line connecting
the encoder to the channel.
Remove 1 V
To remove a 1 V
Click and hold on the desired encoder graphic located below the module
graphic in the Setup tab.
Drag the selected encoder graphic away from its current location.
The encoder graphic is replaced with the Delete icon.
Release the button.
The selected encoder is removed from the channel assignment.
98
or TTL encoder type
PP
and TTL encoder types
PP
or TTL encoder type:
PP
or TTL encoder assignment
PP
or TTL encoder type assignment:
PP
HEIDENHAIN | MSE 1000 | Operating Instructions | 10/2015