Display Formats - HEIDENHAIN MSE 1000 Operating Instructions Manual

7
Software setup
7.4 MSEsetup configuration
7.4.9

Display formats

Display format settings are used to select the way measurements are formatted
when displayed in the Data screen and transmitted to the output file.
Selecting a display format applies the change to all channels in the MSE 1000
module chain that use that format. Individual channels can be to set to a different
format in the Setup screen.
Available formats:
Display resolution
0.000005 ... 0.5
Select display formats
To select Display formats:
Click the Display formats button.
Display formats options are displayed at the top of the screen.
Click the Display resolution drop down arrow and select a display resolution.
The updated setting is displayed in the Display resolution drop down box. A
message verifying the action is displayed in the message area.
Click the Radix drop down arrow and select the radix type.
The updated setting is displayed in the Radix drop down box. A message verifying
the action is displayed in the message area.
Click the Angle format drop down arrow and select an angle format.
The updated setting is displayed in the Angle format drop down box. A message
verifying the action is displayed in the message area.
70
Radix
Decimal
Comma
Angle format
360
180 +/-
infinite +/-
360 +/-
HEIDENHAIN | MSE 1000 | Operating Instructions | 10/2015