HEIDENHAIN MSE 1000 Operating Instructions Manual page 80

8
Commissioning and preparing to measure
8.1 Network configuration
Set Port
The Port number is used to receive messages from MSE 1000 modules on the
selected IP address. This option only needs to be modified if there is another
application using the same IP address and port number.
The port number must be between 1024 - 49151 and cannot be 27015 or 27300.
Port number 27015 is reserved for use by modules. Port number 27300 is reserved
for asynchronous messaging from modules. The default port number is 27016.
To set the Port:
Enter a port value into the Port field.
Click the Port button.
A message verifying the change is displayed in the Connect screen message area.
Set Asynchronous Port
The Asynchronous Port number is used to receive asynchronous messages
from MSE 1000 modules on the workstation IP address. This option only needs
to be modified if there is another application using the same IP address and
asynchronous port number.
The asynchronous port number must be between 1024 - 49151 and cannot be
the same as the port. For information on the port, see "Set Port", page 80. The
default asynchronous port number is 27300.
To set the Asynchronous Port:
Enter a port value into the Async. Port field.
Click the Async. Port button.
A dialog window appears asking if the port should be changed.
Click the OK button.
A dialog window appears stating that MSEsetup will restart. A message
verifying the action is displayed in the message area.
Click the OK button.
80
HEIDENHAIN | MSE 1000 | Operating Instructions | 10/2015