Diagnostics Mode - HEIDENHAIN MSE 1000 Operating Instructions Manual

7.4.8

Diagnostics mode

Diagnostics mode options are used to set the diagnostics mode running inside
MSE 1000 modules.
Disabling Diagnostics mode will speed up data capture when maximum
throughput is desired.
Full diagnostics mode is enabled for a module when the Diagnostics screen is
open and returned to the selected setting when the Diagnostics screen is exited.
Available diagnostics modes:
Full
Status
Minimal
Off
Select diagnostics mode
To select a diagnostics mode:
Click the Diagnostics mode button.
Diagnostics mode options are displayed at the top of the screen.
Click the Diagnostics mode drop down arrow and select a diagnostics mode.
The updated setting is displayed in the Diagnostics mode drop down box. A
message verifying the action is displayed in the message area.
HEIDENHAIN | MSE 1000 | Operating Instructions | 10/2015
MSEsetup configuration
7
7.4
69