Initial Power-Up - HEIDENHAIN MSE 1000 Operating Instructions Manual

6

Initial power-up

6.1 Power cycling
6 Initial power-up
MSE 1201 (ID 747501-01)
The MSE 1201 (ID 747501-01) power supply module has a power switch
turning power on and off.
To power-up the system:
Press the On (supply) side of the power switch to power-up the system.
MSE 1201 (ID 747501-02), MSE 1202 (ID 747502-0x)
The MSE 1201 (ID 747501-02) and MSE 1202 (ID 747502-0x) power supply modules
do not have a power switch for turning power on and off.
To power-up the system:
Turn power on for the system.
6.1 Power cycling
Power cycling refers to the procedure of turning the power provided to the
MSE 1000 modules off and then back on. Power cycling is typically used when
troubleshooting communication problems between MSEsetup and the modules
and may allow the modules to reinitialize their configuration or recover from an
unresponsive state.
To power cycle the module chain:
Power-off the module chain. Refer to "Power-off", page 165.
Wait twenty seconds.
Power-up the module chain. Refer to "Initial power-up", page 48.
48
5 for
HEIDENHAIN | MSE 1000 | Operating Instructions | 10/2015