Units Of Measurement - HEIDENHAIN MSE 1000 Operating Instructions Manual

7
Software setup
7.4 MSEsetup configuration
7.4.7

Units of measurement

Units of measurement settings are used for selecting the linear and angular units
of measure displayed in MSEsetup and included in transmitted or printed data for
all encoders in the MSE 1000 module chain. Individual channel units can be to set
to a different unit in the Setup screen.
Available units:
Linear
Select units of measurement
To select units of measurement:
Click the Units of measurement button.
Units of measurement options are displayed at the top of the screen.
Click the Linear drop down arrow and select a linear unit of measurement.
The updated setting is displayed in the Linear drop down box. A message verifying
the action is displayed in the message area.
Click the Angular drop down arrow and select an angular unit of measurement.
The updated setting is displayed in the Angular drop down box. A message
verifying the action is displayed in the message area.
68
Angular
mm
in
deg
dms
rad
HEIDENHAIN | MSE 1000 | Operating Instructions | 10/2015