Channel Setup - HEIDENHAIN MSE 1000 Operating Instructions Manual

8.3

Channel setup

The Channel setup tab provides options for configuring individual channels on a
module. Settings options are not visible if a device is not connected to a channel or
the connected device does not support the option.
EnDat encoder types are automatically recognized when an EnDat encoder is
connected to a module channel.
1 V , LVDT, TTL, and analog devices must be manually assigned when a device
PP
is connected to a module channel and manually removed if the encoder is
disconnected from the module.
Input and output (I/O) channel assignments are created regardless of an active
connection to the channel. The channel assignment can be removed if an input
or output is not being used and reassigned if the channel is being used at a later
time.
Compressed air channel assignments are created regardless of an active
connection to the channel.
Channel tab information:
Channel label
Display resolution
Unit of Measurement
Channel setup tab
HEIDENHAIN | MSE 1000 | Operating Instructions | 10/2015
Angle format
Error compensation
Scale Factor
Channel setup
Counting Direction
8
8.3
97