Individual Module Ip - HEIDENHAIN MSE 1000 Operating Instructions Manual

8.1.4

Individual Module IP

Individual Module IP options are used for querying or setting a static IP address for
a specific module in the module chain. The Query option is available even when
there is not an active connection between the workstation and the MSE 1000
modules.
The workstation NIC and MSE 1000 base module must be connected
with an ethernet cable for Individual Module IP options to function.
Select a module with an active connection
The Individual Module IP drop-down list is available when there is an active
communication connection between the workstation and the MSE 1000 modules.
To select a module from the drop-down list:
Click the Individual Module IP drop-down arrow and select a module from the
list.
Select a module without an active connection
Individual Module IP text fields are enabled when there is not an active connection
between the workstation and the MSE 1000 modules. Which text fields are
enabled is determined by the Workstation IP netmask setting. Values automatically
entered in disabled text fields are determined by the IP address and the netmask
specified in the Workstation IP option.
To select a module by IP address:
Click inside an enabled text field and enter the required value to communicate
with a specific module. Repeat this step until all text fields have the required
value entered.
Query a module
The Query option sends a request to the selected module to determine the
module type. This is useful for testing if MSEsetup can communicate with a
specific module.
To query a module:
Select a module using one of the methods described above.
Click the Query button.
Query results will be displayed in the Connect screen message area.
Set static IP address
The Set Static option sends a request to the selected module to change the
static IP address to the value specified in the Set Static text fields. Which text
fields are enabled is determined by the Workstation IP netmask setting. An active
connection is required when setting a static IP address.
To set a static IP address:
Click the Individual Module IP drop-down arrow and select a module from the
list.
Click inside an enabled Set Static text field and enter the desired value. Repeat
this step until all Set Static text fields have the desired value entered.
Click the Set Static button.
MSEsetup sets the static IP address and performs a reconnect to the modules.
HEIDENHAIN | MSE 1000 | Operating Instructions | 10/2015
Network configuration
8
8.1
83