Connecting Modules - HEIDENHAIN MSE 1000 Operating Instructions Manual

4.2

Connecting modules

This product contains components that can be damaged by electrostatic
discharge (ESD). Observe precautions for handling ESD sensitive devices and
never touch connector pins unless properly grounded.
To connect modules:
Verify all power switches are in the off position (if applicable) and power is
removed from all power supply modules in the module chain.
Slide the right module to the left until the lock tab
with the lock tab receiver
HEIDENHAIN | MSE 1000 | Operating Instructions | 10/2015
CAUTION
7
29 of the right module.
Connecting modules
of the left module engages
4
4.2
35