Lvdt Teach Resolutions - HEIDENHAIN MSE 1000 Operating Instructions Manual

8.2.2

LVDT Teach resolutions

The LVDT Teach resolutions screen is used to convert the voltage value returned
from an LVDT sensor into millimeters or inches. The conversion is done by
interpolating the voltage based on the minimum and maximum physical position of
the sensor. The Teach resolutions screen configures all of the sensors connected
to a single LVDT module. LVDT sensors can be configured individually from the
Setup screen channel and device tabs. Teach resolutions only applies to a channel
that has a sensor assigned to it.
Teach resolutions information:
Min (mm) or Min (in)
Max (mm) or Max (in)
Sensor output (V)
Res. (mm/V) or Res. (in/V)
Calibration timestamp
LVDT Teach resolutions screen
To view the LVDT Teach resolutions screen:
Click the Setup button.
Select an LVDT module from the Tree or the Module view.
Click the Calibration button.
Click the OK button to the right of Teach resolutions.
The LVDT Teach resolutions screen for the selected module appears.
HEIDENHAIN | MSE 1000 | Operating Instructions | 10/2015
Module setup
8
8.2
95