Network Troubleshooting 12.13; Command Line Tools - HEIDENHAIN MSE 1000 Operating Instructions Manual

12.13 Network troubleshooting

12.13.1 Command line tools

Microsoft Windows provides three command line tools that are helpful when
troubleshooting network communication problems. The use of these tools may be
required during network troubleshooting procedures.
Command line tools:
Netstat
Ping
Ipconfig
Netstat
Netstat can be used to show the IP addresses and ports that are currently open.
To use Netstat:
Open a command line program.
Enter "netstat.exe –noa" into the command line.
Press Enter on the keyboard.
The IP address, UDP ports, and process ID are displayed.
Ping
Ping can be used to test network connectivity between the workstation and an
MSE 1000 module.
Open a command line program.
Enter "ping [ip_address]" into the command line. [ip_address] is the IP address
of the module to ping.
Press Enter on the keyboard.
If the ping is successful, a reply will be shown from the requested IP with the size
of the packet sent and the time it took to get the response.
If the ping is not successful, the reply "Destination host unreachable" or
"Destination net unreachable" will be displayed.
HEIDENHAIN | MSE 1000 | Operating Instructions | 10/2015

Network troubleshooting 12.13

12
161