Module Setup - HEIDENHAIN MSE 1000 Operating Instructions Manual

8.2

Module setup

The Module setup tab provides options to change the label used to identify a
module and the ability to activate or deactivate a module. Hardware, firmware and
network information specific to the selected module is also displayed.
The Setup screen for an LVDT module provides a button for accessing a calibration
screen. The LVDT calibration screen provides options for updating the excitation
voltages and for configuring the channel resolutions from a single location.
Module tab information:
Module label
Model
Module ID
Hardware ID
Bootloader version
Module setup tab
To view Module setup options:
Click the Setup button.
Select a module from the Tree or the Module view.
The Module setup tab for the selected module appears in the Setup screen.
HEIDENHAIN | MSE 1000 | Operating Instructions | 10/2015
Firmware version
Serial number
Using DHCP
IP address
IP address (static)
Module setup
Netmask
Netmask (static)
MAC address
Active
8
8.2
91