Table of Contents
Advertisement
4
Mounting
4.1
Mounting a module
4.1
Mounting a module
A power supply module must always be to the left of any modules it is powering
in the module chain. Once the maximum power consumption rating of a power
supply module is reached, install another power supply module into the module
chain.
To mount a module:
Verify all power switches are in the off position (if applicable) and power is
removed from all power supply modules in the module chain.
Align the bottom edge of the DIN rail with the bottom channel
module.
Gently apply upward pressure, depressing the DIN rail spring
the DIN rail into the bottom channel
While maintaining upward pressure, rotate the top of the module towards the
DIN rail until the top channel
Gently release the upward pressure, locking the module onto the DIN rail.
34
CAUTION
33
of the module.
31
of the module is aligned above the DIN rail.
HEIDENHAIN | MSE 1000 | Operating Instructions | 10/2015
33
of the
32
and inserting
Advertisement
Table of Contents
Troubleshooting
