HEIDENHAIN MSE 1000 Operating Instructions Manual page 54

7
Software setup
7.2 MSEsetup overview
Confirmation buttons
Button
Enable/disable buttons
Button
Setup screen buttons
Button
LVDT teach resolution screen buttons
Button
54
Function
OK: Confirms or starts an action.
Cancel or Delete: Deletes data or cancels an action.
Function
Enabled: Shows that an option is enabled. Clicking the button will tog-
gle the option to disabled.
Disabled: Shows that an option is disabled. Clicking the button will
toggle the option to enabled.
Function
Calibration screen: Opens the calibration screen for calibrating LVDT
modules. Clicking will toggle the button to the Setup screen button.
Setup screen: Returns to the setup screen from the LVDT calibration
screen. Clicking will toggle the button to the Calibration screen button.
Function
SetAllMin: Sets the minimum position value for all sensors. Minimum
position values are used when calculating sensor resolution.
SetAllMax: Sets the maximum position value for all sensors. Maxi-
mum position values are used when calculating sensor resolution.
HEIDENHAIN | MSE 1000 | Operating Instructions | 10/2015