HEIDENHAIN MSE 1000 Operating Instructions Manual page 105

Select signal period
The signal period is based on the type of 1 V
to the channel. The signal period is used to convert the count returned from the
encoder to a linear position. Refer to the documentation provided with the device
for the correct signal period setting.
To select a signal period:
Click the signal period drop-down arrow and select the desired value.
Click the OK button.
A message verifying the action is displayed in the message area.
1 V encoder
pp
ST 128x
ST 308x
LS 388C
LS 688C
LS 187
LS 187C
LS 487
LS 487C
LB 382C
LF 183
LF 183C
LF 483
LF 483C
TTL Encoder
LS 177
LS 477
LS 177C
LS 477C
LS 328C
LS 628C
LS 378C
HEIDENHAIN | MSE 1000 | Operating Instructions | 10/2015
Signal
period
20 µm
20 µm
20 µm
20 µm
20 µm
20 µm
20 µm
20 µm
40 µm
4 µm
4 µm
4 µm
4 µm
Resolution Signal
period
1 µm 20 µm
0.5 µm 20 µm
0.25 µm 20 µm
1 µm 20 µm
0.5 µm 20 µm
0.25 µm 20 µm
5 µm 20 µm
1 µm 20 µm
0.5 µm 20 µm
0.25 µm 20 µm
or TTL linear encoder connected
PP
Reference
marks
Single
Single
Coded/1000
Coded/1000
Single
Coded/1000
Single
Coded/1000
Coded/2000
Single
Coded/5000
Single
Coded/5000
Interpolation Reference
factor marks
5-fold Single
10-fold Single
20-fold Single
5-fold Coded/1000
10-fold Coded/1000
20-fold Coded/1000
n/a Coded/1000
5-fold Coded/1000
10-fold Coded/1000
20-fold Coded/1000
Device setup
8
8.4
105