HEIDENHAIN MSE 1000 Operating Instructions Manual page 92

8
Commissioning and preparing to measure
8.2 Module setup
Change Module label
The Module label is a unique name that can be assigned to a module to help
identify it from other modules in the module chain. The module model number is
assigned as the default label. A maximum of 13 characters may used for the label.
To change the Module label:
Click inside the Module label text field.
Delete the current label.
Enter a unique name for the module.
Click the OK button.
A message verifying the action is displayed in the message area.
Activate/deactivate module
A module can be deactivated and left in the module chain and later reactivated.
This is useful if data is not required for a specific task, but is needed for others
at a later time. When a module is deactivated it is no longer polled for updates.
Deactivated modules are removed from the Data and Mastering screens and their
diagnostic data is not available. Module View will show the inactive module in a
lighter tint.
To change the active status of a module:
Click Active toggle button to change the active status.
Click the OK button.
92
HEIDENHAIN | MSE 1000 | Operating Instructions | 10/2015