Workstation Ip - HEIDENHAIN MSE 1000 Operating Instructions Manual

8.1.2

Workstation IP

Workstation IP options set the IP address, netmask and port used for
communication between the workstation and the MSE 1000 modules. All changes
are saved to the System Configuration file.
Select IP address
The first drop-down list shows the available IP addresses of the workstation.
The IP address of the workstation NIC connected to the MSE 1000 base module
should be chosen from the list. If it exists, the default subnetwork is 172.31.46.
This is the default subnetwork assigned to MSE 1000 modules.
The workstation IP address will not appear if the network cable is not
attached to a powered router or the MSE 1000 base module.
To select the workstation IP address:
Click the IP address drop-down arrow.
Select the IP address assigned to the workstation NIC that is connected to the
MSE base module.
A message verifying the change is displayed in the Connect screen message area.
Select netmask
The second drop-down list shows the netmask options. This option only needs
to be modified if the modules are changed by DHCP . The default netmask is
255.255.255.0.
To select a Netmask:
Click the netmask drop-down arrow.
Select the required netmask.
HEIDENHAIN | MSE 1000 | Operating Instructions | 10/2015
Network configuration
8
8.1
79