Mounting - HEIDENHAIN MSE 1000 Operating Instructions Manual

4

Mounting

4

Mounting

The following items are included with the product:
MSE 1xxx module
Installation Instructions
Cable mounting hardware kit
Power connector, included with MSE 1201 (ID 747501-0x)
Left end cover kit, included with MSE 1201 (ID 747501-0x) and MSE 1202
(ID 747502-0x)
Right end cover kit, included with MSE 1201 (ID 747501-0x) and MSE 1202
(ID 747502-0x)
Female M8 connector, included with MSE 1202 (ID 747502-0x) and MSE1401
(ID 747507-02)
Male M8 connector, included with MSE 1401 (ID 747507-02): Qty. 2
Do not mount in a position that makes it difficult to access the power switch or
power cable.
MSE 1000 modules are designed to be mounted on a standard 35 mm, DIN
EN 50022 rail in an electrical cabinet or on a mounting stand (accessory). The
individual modules are plugged into each other and fixed together with a lock
creating a module chain.
 
19" mounting cabinet
In its basic configuration, the MSE 1000 consists of a power supply module and a
base module. It can be expanded by further modules as needed. In all, up to 250
axes or channels can be configured.
Multiple power supply modules may be needed based on the power consumption
of the modules following the power supply in the module chain and any equipment
connected to those modules. When the maximum power rating of a power supply
module is reached it is necessary to install another power supply module into the
module chain. For maximum power consumption rating of power supply modules
see "Technical specifications", page 167.
32
WARNING
   
Mounting stand
HEIDENHAIN | MSE 1000 | Operating Instructions | 10/2015