Connect The Encoders; Secure The Cables; Configure The Dhcp Router; Install The Software - HEIDENHAIN MSE 1000 Operating Instructions Manual

10.1.5

Connect the encoders

Connect the 1 V
Connect the 1 V
see "Connecting a 1 VPP encoder", page 44.
Connect the EnDat encoder
Connect the EnDat encoder to the MSE 1314 (ID 747503-01) X11 connector 16,
see "Connecting an EnDat encoder", page 43.
10.1.6

Secure the cables

Install cable mounting hardware
Install the cable mounting hardware provided with each module, see "Installing
cable mounting hardware", page 36.
Secure cables
Secure all cables to the cable mounting hardware using the supplied cable tie's.
10.1.7

Configure the DHCP router

Configure the DHCP router
Connect to the router through the router utility. This is usually a web browser.
Refer to the documentation provided with the router for instructions.
Set the IP address of the router to 172.31.46.3.
Set the netmask to 255.255.255.0.
Set the address range for 172.31.46.4 to 172.31.46.255.
Set the lease time to Forever.
Disable SNTP .
10.1.8

Install the software

Install MSEsetup
Download and install the MSEsetup application software, see "Installing
MSEsetup", page 49.
10.1.9

Open the software

Open MSEsetup
Double-click the MSEsetup desktop icon to open MSEsetup, see "Basic
functions", page 61.
HEIDENHAIN | MSE 1000 | Operating Instructions | 10/2015
Example using DHCP IP address assignment
encoder
PP
encoder to the MSE 1184 (ID 747500-01) X1 connector 17,
PP
10
10.1
127