HEIDENHAIN MSE 1000 Operating Instructions Manual page 148

12
Troubleshooting
12.1 Diagnostics
Analog diagnostics
Analog diagnostics are used to monitor the analog value from an analog device and
show the conversions to units, the effect of scaling, the effect of mastering, and
the electrical value used by the device.
Analog diagnostics:
Signal
Value
Value scaled
Analog diagnostics screen
Analog diagnostics
Signal
Value
Value scaled
Value mastered
+5V 1
Ground
+5V 2
Vref
148
Value mastered
+5V 1
Ground
Displays the raw value in volts or mA.
Displays the raw value multiplied by the calibrated reso-
lution.
Displays the value multiplied by the scale factor.
Displays the scaled value with the master offset.
Displays the 5V source.
Displays the ground.
Displays a second readout of the 5V source.
Displays the reference voltage.
+5V 2
Vref
HEIDENHAIN | MSE 1000 | Operating Instructions | 10/2015