HEIDENHAIN MSE 1000 Operating Instructions Manual page 112

8
Commissioning and preparing to measure
8.6 Mastering
Master button
To open the Mastering screen:
Click the Master button.
The Mastering screen is displayed in the content area. A message verifying the
action is displayed in the message area.
Apply offsets
To apply offsets:
Double-click inside an offset value field.
The current value is highlighted.
Enter the required offset value.
Repeat entering offset values for all channels that require an offset.
Click the Apply all button.
A message veryfying the action is displayed in the message area.
Unapply offsets
To unapply offsets:
Click the Unapply all button.
A message veryfying the action is displayed in the message area.
Enable channel offset
To enable a channel offset:
Select a channel from the Tree.
Click the Enable offset button.
Click the Apply all button.
The Enable offset button toggles to the Disable offset button. A message veryfying
the action is displayed in the message area.
112
HEIDENHAIN | MSE 1000 | Operating Instructions | 10/2015