Figure 34 Initial Winscp Log-In Screen - Quantum DXi6900 Field Service Manual

Chapter 2: Service Menus
Retrieving a Crash Dump File
Figure 34 Initial WinSCP Log-in
Screen
72
.
2 Under the Session section of the login screen enter the following
information:
• Hostname - IP Address of the DXi
• Port Number - Leave set to 22
• Username - ServiceLogin
• Password - (see
Leave all other fields as defaults
Note: You can also leave the Username and Password boxes
blank, and you will be prompted to enter them during the
authentication process.
After you are successfully connected to the DXi system, the default
view will be showing the root directory (see
on the interface that you have selected (Explorer View or Norton
Commander View).
Table 8 for system passwords)
Quantum DXi6900 G1 User's Guide
Figure 35), depending