Page 1: Table Of Contents
Quantum DXi -Series Command Line Interface (CLI) Guide Introduction CLI Users CLI Passwords or Authorized Keys ........10 Available Linux Commands .
Page 2 GoVault, MediaShield, Optyon, Pocket-sized. Well-armored, SDLT, SiteCare, SmartVerify, StorageCare, Super DLTtape, and Vision are trademarks of Quantum. LTO and Ultrium are trademarks of HP, IBM, and Quantum in the U.S. and other countries. All other trademarks are the property of their respective companies. Specifications are subject to change without notice.
Page 3 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Listing of Existing NAS Share Names ....... . 30 Getting the Total NAS Share Count .
Page 4 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Listing Deduplicated NAS on the Source ......49 Listing Replicated VTL on the Target .
Page 5 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Editing an LSU..........58 Listing an LSU .
Page 6 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Path To Tape CLI Commands Listing the Path to Tape Initiator ........90 Listing the Path to Tape Ports .
Page 7 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Analyzer CLI Commands Analyzing the Network ......... . 96 Enabling or Disabling the NetServer to Perform a Network Analysis .
Page 8: July
Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Contents...
Page 9 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Introduction The Command Line Interface (CLI) for DXi™-Series systems serves as a command line equivalent of the remote management functionality. This guide describes the CLI commands for DXi 2.0.1 Software, which is available for the following systems: •...
Page 10: Cli Passwords Or Authorized Keys
Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Additional commands are available to the CLI admin user but not to the CLI viewer user. For example, the ftp command is available only to the CLI admin...
Page 11 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 upon which the command will operate.The syntax of each CLI is listed in each section. The syntax for all syscli commands falls into one of the following two formats: •...
Page 12: Adding The Cli Directory To The Path
Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Finally, it should be noted that all options and values are defined as single tokens in the command line syntax. Thus if a provided value consists of multiple tokens, it must be quoted to prevent the shell from interpreting it as separate tokens.
Page 13 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 CLI Special Options Every command can accept these options: • --outfile <output_filename> • --errfile [<error_filename>] • --file <options_filename> • --ws [<ws_server>[:<port>] The first two options are supported because the shell capability of redirecting the standard output and standard error using the “>”...
Page 14: Syntax Of Options File
Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Syntax of Options File The following are the syntax conventions for the options file: • Command line options are processed from left to right. Thus any option in the file can be overridden by listing it again on the command line after the --file option.
Page 15: Web Services Syntax
Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Note: Possible error codes are listed at the end of each major section below. Web Services Support (Optional) By default, each CLI is executed directly on the DXi system it is running.
Page 16: Web Services Session
Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 • syscli --list share ... --ws :9090 Web Services Session For security reasons the WS server cannot allow an arbitrary client to send commands to it for execution. Before a client can execute any command, it has to log in the WS server first in order to begin a WS session.
Page 17: Supported Web Services Commands
Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Note again that the credential token can be omitted because the syscli program can use the cached value. Supported Web The DXi 2.0.1 Software release supports about 20 Web Services commands, also Services Commands known as “operations”...
Page 18: Documentation Of Web Services Commands
Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Consider the command --list healthcheckstatus, which is not supported in Web Services. To understand how it can be run over Web Services, one needs to understand how the runcmd CLI works.
Page 19: Listing Existing Vtl And Its Attributes
Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 • Turning a VTL Online/Offline • Listing Available Hosts • Adding a Host • Editing a Host • Deleting a Host • Listing Targets • Listing Devices •...
Page 20: Listing Available Library Models
Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Listing Available Library syscli --list library Models This CLI command allows the CLI admin to display a list of the available library models. Specific library model or product ID is required when adding or creating a new partition.
Page 21: Editing A Vtl
Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 This CLI command allows the CLI admin to add a partition. The following partition settings are required: • Virtual Library name • Library model • Number of storage slots •...
Page 22: Creating Media
Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 [mediatype = 1] type = SDLT1 capability = RW [mediatype = 2] type = SDLT2 capability = RW [mediatype = 3] type = DLTS4 capability = RW Creating Media syscli --add media --name <VTL_name> --type <media_type> --media <number_of_media> --barcodestart <starting_barcode> --location slot | ieslot [--capacity <media capacity>] This CLI command allows the CLI admin to create a media for a defined VTL.
Page 23: Media Actions
Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 access = scratch pool = application used = 0.0 capacity = 800.0 [media = 2] vtl = MyVTL barcode = SDL101 type = SDLT access = scratch pool = application used = 0.0 capacity = 800.0 Media Actions syscli --del media --barcode <barcode> --name <VTL_name> syscli --export media (--barcode <barcode>) | --all --name <VTL_name>...
Page 24: Listing Available Hosts
Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Listing Available Hosts syscli --list host This CLI command allows the CLI admin to display a list of available hosts. The WWPN, its alias (if it was added by the user) and connection status are returned for each host.
Page 25: Listing Devices
Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 node = 1 alias = FC3 wwpn = 214108001bc08278 Listing Devices syscli --list device --name <VTL_name> This CLI command allows the CLI admin to display a list of devices on the system. The list includes the type of device (VMC or VTD), serial number of the device and the virtual tape library name the device is in.
Page 26: Adding A San Clients Group
SAN. The CCL is accessible to hosts only through LUN 0. Caution: If you are not sure if you should use CCL, contact Quantum Customer Support before you enable this option.
Page 27: Deleting A San Client Group
Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Deleting a SAN Client syscli --del sanclientgroup --name <VTL_name> --groupname Group <group_name> This CLI command allows the CLI admin to delete a SAN client group given the required VTL name and the group name.
Page 28: Moving Media
Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 barcode = N/A writeprotect = disabled access = N/A used = N/A [storage location = 4] location type = I/E Slot index = 3 drive serial number = N/A barcode = N/A writeprotect = disabled access = N/A used = N/A Moving Media syscli --move media --name <VTL_name> --srctype slot | drive | ieslot --desttype slot | drive | ieslot --srcindex <source_index> --destindex <destination_index>...
Page 29: Listing The Existing Nas Share And Attributes
Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 NAS Configuration CLI Commands The following sections describe the supported NAS configuration CLI commands: • Listing the Existing NAS Share and Attributes • Listing of Existing NAS Share Names •...
Page 30: Listing Of Existing Nas Share Names
Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Listing of Existing NAS syscli --list sharename [--proto cifs|nfs] [--namematch <pattern>] Share Names This CLI lists all share names for both CIFS and NFS. If --proto is specified, only names of shares associated with the specified protocol will be listed.
Page 31: Editing A Nas Share
Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 CLI command options: • --add: Adds one or more NAS shares. Option --hidden does not apply to NFS shares. • --name: sharename: must be alphanumeric character. • --proto: Network file sharing protocol (currently CIFS and NFS are supported) •...
Page 32: Deleting A Nas Share
Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 • --name: sharename: must be alphanumeric character. Must begin with a letter. • --perms: change permissions to read-write or read-only. • --restart: applicable to CIFS share only. If specified, restart CIFS service. This can cause disruption to all users and all backup jobs.
Page 33: Joining Or Disjoining A Windows Domain
Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 This CLI command allows the admin user to delete all NAS shares. If --proto is specified, all shares of that protocol are deleted. CLI command options: • --deleteall: Deletes all existing NAS shares.
Page 34: Workgroup Users
Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 disjoin ADS for cases where the AD server is changed or the old admin user account is no longer valid. CLI command options: • --join: Joins CIFS server to a Windows Active Directory domain.
Page 35 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 The following Workgroup Users control commands are available: • List of Workgroup Users • Add a Workgroup User • Edit a Workgroup User • Delete a Workgroup User •...
Page 36: Share Administrators
If the command is typed in a shell, the backslash has to be typed twice. For example, if the domain name is quantum.com and the user is joe, the command to be typed a the shell prompt reads as follows:...
Page 37: Cifs Share Access Control
Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Delete a Share Administrator syscli --del shareadmin --name <domain_user_or_group_name> This CLI command allows the admin user to remove the share admin rights from an existing share administrator. The syntax for the domain user/group name is the same as discussed in the command --add shareadmin.
Page 38 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 This command works only when the server is joined to a workgroup. If the server is joined to an Active Directory domain, please use the Microsoft Management Console (MMC) tool.
Page 39: Nfs Share Access Control
Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 the specified share is empty, which means the share now allows read-write access to all workgroup users (see command --add shareuser). This command works only when the server is joined to a workgroup. If the server is joined to an Active Directory domain, please use the Microsoft Management Console (MMC) tool.
Page 40: Query Status Of A Nas Service
Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Deleting All Share Hosts syscli --deleteall sharehost --share <NFS_share_name> [--sure] This CLI command allows the admin user to remove the right to access the specified NFS share from all NFS hosts. As a result, the share access list of the specified share is empty, which means the share now allows read-write access to all NFS hosts (see command --add sharehost).
Page 41: Setting The Cifs Settings
Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 • --ldapsigning: queries the LDAP client signing setting (“client ldap sasl wrapping”) • --maxprocesses: queries the limit on the number of smbd processes (“max smbd processes”) • clientntlmv2auth: queries the setting “client NTLMv2 auth”.
Page 42: Commit Nfs Asynchronously
Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 to stable storage. This mode improves I/O performance but may cause data inconsistencies in case of power failure or severe interruptions. b Standard mode: Honor the NFS commit calls truthfully by committing cached data to stable storage before responding to the clients.
Page 43 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 • Enabling NAS Share Replication Options on the Source • Disabling NAS Share Replication Options on the Source • Checking Readiness on Source • Aborting Replication of VTL or NAS •...
Page 44: Initiating A Cartridge Based, File/Directory Based, Or Namespace Replication
Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 • Getting the Status of the Active Synchronization Requests • Listing the File/Directory-Based Replication Status and Statistics • Listing the File/Directory-Based Replication Target Shares • Listing the Cartridge Replication Status and Statistics •...
Page 45: Getting Vtl Or Nas Share Lock Status
Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Getting VTL or NAS syscli --getstatus vtllock --name <VTL_name> Share Lock Status This CLI command allows the CLI admin to retrieve the status of the lock for the specified VTL.
Page 46: Adding A Source On A Target
Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Adding a Source on a syscli --add sourcerep --hostid <host_id> Target This CLI command allows the admin user to add or specify the replication source IP or hostname of a source DXi system for this system as a target.
Page 47: Disabling Vtl Replication Options On The Source
Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 --hourinterval is specified, enable schedule replication for every given hour interval starting at the first hour specified by --starttime. This time must be specified in 24 hour <hh> format, e.g, 09 or 23. If the --syncid is not specified when --cartbase is specified, the default Sync ID is the same as the VTL name (similar to the GUI).
Page 48: Checking Readiness On Source
Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Checking Readiness on syscli --checkrepready nas --name <nas_share> Source This CLI command allows the admin user to check and verify the status of the NAS share prior to replicating. The output will show the status of the NAS.
Page 49: Listing Deduplicated Vtl On The Source
Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 This CLI command allows the admin user to clear replication statistics. If the --sent option is specified, the sent replication statistics will be cleared. If the --received option is specified, the received replication statistics will be cleared.
Page 50: Listing Replicated Vtl On The Target
Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Listing Replicated VTL syscli --list repvtl on the Target This CLI command allows the CLI admin to display a list of all the replicated virtual tape libraries (VTLs) that have been performed on the system as a target.
Page 51: Recovering Vtl On The Target
Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Replication Status = Success Recovering VTL on the syscli --recover vtl --repname <replicated VTL_name> --srchost Target <source_hostname_or_IP address> --id <ID_of_the_replicated_VTL> [--recname <recovered_VTL_name >] [--submit] This CLI command allows the CLI admin to recover and recreate the cartridges on the target system.
Page 52: Failback A Nas Share On The Target
Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Failback a NAS Share on syscli --failback repnas --repname <replicated_NAS_share_name> --srchost the Target <source_hostname> --id <ID_of_the_replicated_NAS> --tgthost <target_source_IP_address> [--encrypt] This CLI command allows the admin user to failback a replicated share to its specified source.
Page 53: Listing The Replicated Nas Recovery Jobs On Target
Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Recovery Job Finished = Mon Jun 1 11:22:43 2009 Recovery Job Status = Success Listing the Replicated syscli --list nasrecjob NAS Recovery Jobs on This CLI command allows the user to list the replicated NAS recovery jobs on the Target target.
Page 54: Listing The Replicated Nas Failback Jobs On The Target
Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Listing the Replicated syscli --list nasfailbackjob NAS Failback Jobs on This CLI command allows the user to list the replicated NAS share failback jobs the Target on the target.
Page 55: Disabling Vtl Cartridge Based Replication On The Target
Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Disabling VTL Cartridge syscli --disable cartrep --name <VTL_name> Based Replication on This CLI allows the admin user to disable cartridge based replication for the the Target specified VTL on the target.
Page 56: Listing The Cartridge Replication Status And Statistics
Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Listing the Cartridge syscli --list cartrepstats --name <VTL name> Replication Status and Lists the cartridge-based replication status and statistics of the data sent to the Statistics target for the specified share on the source system.
Page 57: Adding A Storage Server
Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 • Listing a Storage Server • Adding an LSU • Deleting an LSU • Editing an LSU • Listing an LSU • Setting OST Global Settings • Getting OST Global Settings •...
Page 58: Adding An Lsu
Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 • ^xxx – Matching pattern xxx at the start of names • xxx$ – Matching pattern xxx at the end of names Remember to escape $ with a backslash because it is special to the shell. For...
Page 59: Setting Ost Global Settings
Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Physical capacity = 20.00 GB Description = LSU_One Setting OST Global syscli --set ostsetting [--accent on|off] Settings This CLI allows the admin user to set various OST global settings. At the present time only the Accent attribute is supported and must be specified.
Page 60 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Listing E Mail Recipients syscli --list emailrecipient [--name <email_recipient>] This CLI command allows the user to list the e-mail recipients that are configured on the system. An example output of one e-mail recipient is shown below.
Page 61: Outgoing E-Mail Server Cli Commands
Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Outgoing E mail Server The following e-mail server CLI commands are supported: CLI Commands • Displaying the Outgoing E-mail Server • Setting the Outgoing E-mail Server • Deleting the Outgoing E-mail Server...
Page 62 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Getting the E-mail Home Information syscli --get emailhome This CLI command allows the user to display the state of the scheduled e-mail home configuration information. It displays the schedule and the recipients. An example output of E-mail Home Schedule is shown below.
Page 63: Snmp Trap Destination Cli Commands
Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 On Demand E-mail Home Status syscli --send statusondemand [--emailaddr <recipient_email_address>] This CLI command allows the admin user to send the e-mail containing Status information, on demand. On Demand E-mail Home Configuration syscli --send configondemand --emailaddr <recipient_email_address>...
Page 64 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Selected Traps = Failure,Warning,Informational,Available,Unavailable Adding SNMP Trap Destinations syscli --add snmptrapdest --ipaddress <trap_dest_address> --name <trap_dest_name> [ --enable fail, warn, info, avail, unavail ] This CLI command allows the admin user to add SNMP trap destination Editing SNMP Trap Destinations syscli --edit snmptrapdest --ipaddress <trap_dest_address>...
Page 65 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Editing an SNMP Community syscli --edit snmpcom --name <community_name> [--ipaddress <community_IP_address>] [--netmask <community_net_mask>] [--accesstype {get | getset}] [--disable] This CLI command allows the admin user to edit an SNMP community.
Page 66: Upgrading The System Firmware
Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 • Run Command CLI • Changing the Password • Resetting the Password Upgrading the System syscli --upgrade firmware --localfile <filename> [--sure] Firmware This CLI command allows the admin user to upgrade the firmware on the system.
Page 67: Node Management
Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 CLI command options: • --sched: Schedules periodic space reclamation. • --none: If specified, then there is no schedule for periodic space reclamation. • --daily: If specified, then perform daily space reclamation at the given time.
Page 68: License Management
Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 License Management The following license management commands are available: • Displaying Licenses • Adding a License Displaying Licenses syscli --list license This CLI command allows the user to list the available licenses on the system. An example output of available licenses is shown below: List of Licenses:...
Page 69: Diagnostic Logs
This CLI command allows the admin user to add a license on the system. The user needs to provide a key corresponding to the license. Note: For DXi4500 systems, all available licenses are pre-installed at the factory. There is no need to add licenses to these systems.
Page 70: Authenticate User (Login Command)
Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Authenticate User syscli --authenticate --name <username> --password <password> --client (Login Command) <clientinfo> [--timeout <timeout>] [--terse] This command is intended for use with the additional --ws option to log into a Web Services server.
Page 71: Release Credential (Logout Command)
Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Name = Nas.wsdl Version = 1.0‐2010/05/18 [WSDL Support = 5] Name = Nas.xsd Version = 1.0‐2010/11/05 [WSDL Support = 6] Name = Replication.wsdl Version = 1.0‐2010/07/17 [WSDL Support = 7] Name = Replication.xsd Version = 1.0‐2010/07/17 [WSDL Support = 8] Name = System.wsdl Version = 1.0‐2010/09/09 [WSDL Support = 9] Name = System.xsd Version = 1.0‐2010/09/09 Command completed successfully. Example 2: bash‐3.2$ syscli ‐‐authenticate ‐‐name cliadmin ‐‐password **** ‐‐client testing 4eaa94a8c39b707524e9b157eab0eaee Release Credential syscli --release credential [--credtoken <credential_token>]...
Page 72: Changing The Password
Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 With the availability of this command, there are two methods for executing any command. For example, to list all NAS shares: a Run the 'list share' CLI directly:...
Page 73: Resetting The Password
Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 • --oldpassword - if not specified on command line, the program will prompt for the old password and will not echo it to screen. • --newpassword - if not specified on command line, the program will prompt for the new password and will not echo it to screen.
Page 74: Disabling Jumbo Frames
Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Disabling Jumbo syscli --disable jumbo [--dev <device>] Frames Note: This CLI command is not available for DXi6700 systems. This CLI command allows the admin user to disable jumbo frames. If no option is specified, jumbo frames are disabled for both bond0 and bond1.
Page 75: Setting Up An Unsegmented Network
Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 • wan: all but one interfaces are bonded together for WAN configuration • lan: all but one interfaces are bonded together for LAN configuration • data: all but one interfaces are bonded together for DATA configuration •...
Page 76: Querying The Network
Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 • --dnssecondary: Secondary IP address of DNS. • --dnstertiary: Tertiary IP address of DNS. • --dnssearchpath: Search path lookup for DNS name. Querying the Network syscli --query network This CLI command allows the user to query for system network configuration information.
Page 77: Adding Custom Network Configurations
Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Caution: Changes made with netcfg CLI commands might cause the system to become inoperable or unreachable. Adding Custom syscli --add netcfg --devname <DEVNAME> --ipaddr <IPADDR> --netmask Network <NETMASK> [--gateway <GATEWAY>] [--policy REP] [--slaves <DEV1>,<DEV2>,<...>] [--restart [--sure]]...
Page 78: Deleting Custom Network Configurations
Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Deleting Custom syscli --del netcfg --devname <DEVNAME> [--restart [--sure]] Network This CLI command allows the admin user to delete the specified network device Configurations and its IP address information. Any slaves associated with the network device will also be deleted.
Page 79: Backing Up The Current Custom Network Configuration
Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Note: The show command displays the network settings that are currently in effect. If you have made changes to the custom network configuration since rebooting the DXi, these changes do not take effect until after the next reboot.
Page 80: Netcfg Configuration Examples
Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 CLI command options: • --restart: Specifies whether to restart the system after restoring previous network configuration. • --sure: if specified, the command will execute and restart without asking for confirmation.
Page 81 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Figure 1 Netcfg Example – Two Data Networks The following syscli sequences can be used to configure a similar setup. To display the existing configuration: syscli --show netcfg...
Page 82 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Figure 2 Netcfg Example – Two Ethernet Ports Only The following syscli sequences can be used to configure a similar setup. To display the existing configuration: syscli --show netcfg...
Page 83 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Figure 3 Netcfg Example – 2 x 2 x 2 Networks The following syscli sequences can be used to configure a similar setup. To display the existing configuration:...
Page 84 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Figure 4 Netcfg Example – 1 x 1 x N Data Networks The following syscli sequences can be used to configure a similar setup. To display the existing configuration:...
Page 85 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 DXI 6540/6550 With All Customer Interfaces Used Independently Data traffic comes from two media servers going thru GbE port #1 and the two 10 GbE ports. Replication and management traffic are routed to GbE port #0.
Page 86 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 1 Display the output of the current runtime network values using syscli -show netcfg to list the current runtime values. (Runtime values are those values that are currently used by the network service. Values must first be configured using the add and delete netcfg commands.
Page 87 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 RX bytes:564058955 (537.9 MiB) TX bytes:564058955 (537.9 MiB) 10.20.184.0/21 dev bond0 proto kernel scope link src 10.20.185.92 default via 10.20.184.1 dev bond0 src 10.20.185.92 0: from all lookup 255 32766: from all lookup main 32767: from all lookup default WARNING: No Replication IP configured Command completed successfully. 2 Delete bond0: [root@rok‐dxi92 DXi]# syscli ‐‐del netcfg ‐‐devname bond0 You have specified the following data for command "DelNetcfg": ‐‐devname = bond0 Are you sure you want to proceed? [yes|no] > yes Command completed successfully. Note: This will not change the output of syscli -show netcfg because the add and delete netcfg commands only affect the network configuration files and not the runtime values.
Page 88 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Are you sure you want to proceed? [yes|no] > yes Broadcast message from root (pts/1) (Wed Jun 8 09:51:50 2011): The system is going down for reboot NOW! Command completed successfully. 5 After the system comes back up, display the runtime network values using syscli -show netcfg. They should now reflect the configured network values. The output should now show eth0 and eth1 as independent interfaces.
Page 89 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 32767: from all lookup default WARNING: No Replication IP configured Command completed successfully. 6 To create a bond using eth0 and eth1 as slaves, enter the following: [root@rok‐dxi92 DXi]# syscli ‐‐add netcfg ‐‐devname bond0 ‐‐ipaddr 10.20.185.92 ‐‐netmask 255.255.252.0 ‐‐gateway 10.20.184.1 ‐‐slaves eth0,eth1 ‐‐mode RR You have specified the following data for command "AddNetcfg": ‐‐devname = bond0 ‐‐ipaddr = 10.20.185.92 ‐‐netmask = 255.255.252.0 ‐‐gateway = 10.20.184.1 ‐‐slaves = eth0,eth1 ‐‐mode = RR Are you sure you want to proceed? [yes|no] > yes Command completed successfully.
Page 90: Listing The Path To Tape Initiator
Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Path To Tape CLI Commands The following Path to Tape CLI commands are available: • Listing the Path to Tape Initiator • Listing the Path to Tape Ports •...
Page 91: Deleting A Backup User
Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Deleting a Backup User syscli --del backupuser --name <backup_user_name> This CLI command allows the admin user to delete a backup application user. Deleting All Backup syscli --deleteall backupuser [--sure]...
Page 92: Using Tape Drives
Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Using Tape Drives syscli --use tapedrive --sernum <tape drive serial number> --usetype {backupapplicationspecific | remove | ignore} This CLI command allows the admin user to set the intended use for the specified tape drive.
Page 93: Getting Vtl Performance
Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Status CLI Commands The following sections describe the supported Status CLI commands: • Getting VTL Performance • Getting Tape Drive Status • Getting Storage Slot Status • Getting the VTL Logical View Status •...
Page 94: Getting Storage Array Status
Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Getting Storage Array syscli --getstatus storagearray Status This CLI command displays the status of all the storage arrays. Getting Hardware syscli --getstatus syscomponent [--systemboard | --networkport] System Component This CLI command returns the status of the hardware system components.
Page 95: Deleting An Administration Alert
Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Alert CLI Commands The following sections describe the supported Alert CLI commands: • Deleting an Administration Alert • Deleting All Administration Alerts • Editing the Service Ticket Analysis •...
Page 96: Showing The Service Ticket Analysis
Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Showing the Service syscli --show ticketanalysis --ticketnum <ticketnum> Ticket Analysis This CLI command allows the admin user to show the service ticket analysis. Showing the Service syscli --show ticketdetail --ticketnum <ticketnum>...
Page 97: Displaying The Netserver Status
Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Displaying the syscli --getstatus netserver NetServer Status This CLI command displays whether NetServer is enabled or disabled on the system. Displaying the Last Run syscli --show throughput --disk | --network Result of the Disk/ This CLI command displays the last run result of the disk/network analysis.
Page 98: Listing The Health Check Status
Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Listing the Health syscli --list healthcheckstatus Check Status This CLI command lists the healthcheck status of certain components in the system. Sample output: bash‐3.2$ syscli ‐‐list healthcheckstatus Output data: Healthcheck Status Total count = 2 HealthCheck = 1 Healthcheck Name = De‐Duplication State = enabled...
Page 99: Getting The Health Check Schedule
Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 End Time = Sun Dec 19 05:00:09 2010 Command completed successfully. Getting the Health syscli --getsched healthcheck Check Schedule This CLI command displays the healthcheck schedule. Sample output: bash‐3.2$ syscli ‐‐getsched healthcheck Output data: Schedule Type = Daily Time = 05:00 AM Command completed successfully. Health Check CLI Commands...
Page 100 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 CLI Error Codes With this release, the following CLI error codes are supported: Error Code Error Message E0000 Error is undefined (programmer forgot to handle error) E0001 Success...
Page 101 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E0108 Command is not specified. E0109 One or more required options are missing. E0110 Option is incompatible with another option specified earlier. E0111 Option is not supported on this system! E0120 Option required a value but the value was not specified.
Page 102 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E0553 The command option file is empty. E0554 Failed to open command option file. E0555 The command option file contains an option that does not start with a double dash.
Page 103 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E0709 User credential is unknown (cannot be determined). E0710 User credential cache is ambiguous and unusable! E0711 User unsupported. E0712 User does not have the admin privilege to change/reset password.
Page 104 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E0804 Nodeclient failed to send command to noded server E0805 Nodeclient failed to receive command status from noded server E0806 Nodeclient failed to receive command output from noded...
Page 105 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E1417 File: Failed to acquire read-lock on file. E1418 File: Failed to back up file. E1419 File: Failed to restore backup file. E1420 File is empty.
Page 106 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E3004 Locking: memory allocation failed E3005 Locking: failed to open lock file E3006 Locking: failed to close lock file E3007 Locking: failed to set lock...
Page 107 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E4023 Option --primary_egid requires a value! E4024 Option --primary_hostname requires a value! E4025 Option --primary_homedir requires a value! E4026 Option --primary_cwd requires a value!
Page 108 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E111012 Feature "all initiators to all targets dev mapping" is not supported on this system! E111013 Feature "vDisk" is not supported on this system! E111014 Feature "VTL VPD page 0xEF support for Networker"...
Page 109 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E111045 FC Adapter is not supported on this system! E111046 Network Port is not supported on this system! E111047 10G Ethernet network configurations options are not...
Page 110 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E130021 Ending decimal number in IPv4 address is missing! E130022 Missing decimal number between decimal points in IPv4 address E140001 Emailaddress entered is empty.
Page 111 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E142003 Stats file read error. E142004 Stats file seek error. E142005 Failed to read OST stats from XML File. E142006 Exception generated when parsing OSTd stats XML.
Page 112 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E1000043 NFS share: Option "hidden" is not supported! E1000044 NFS share: Option "namecase" is not supported! E1000045 NFS share: Failed to get NFS commit attribute from BPWAPI...
Page 113 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E1000099 NAS caching is disabled! E1000100 Failed to query SMB settings! E1000101 The specified name is not a global SMB parameter! E1000102 The specified name is not a valid SMB parameter!
Page 114 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E1000815 JoinAds: Failed to write/set option "domain". E1000821 JoinAds: Option "org" is missing. E1000822 JoinAds: Option "org" requires a value E1000823 JoinAds: Option "org" has invalid value E1000824 JoinAds: Failed to read/get option "org".
Page 115 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E1000872 Failed to join ADS domain! E1000873 Failed to log on to join ADS domain because of bad credential! E1001201 DisjoinWorkgroup: Option "disjoin" is missing.
Page 116 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E1001641 DisjoinAds failed! E1001642 DisjoinAds: Failed to disjoin Active Directory domain! E1002001 GetstatusCifs: Option "getstatus" is missing. E1002002 GetstatusCifs: Option "getstatus" requires a value E1002003 GetstatusCifs: Option "getstatus"...
Page 117 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E1002831 AddShare: Option "desc" is missing. E1002832 AddShare: Option "desc" requires a value E1002833 AddShare: Option "desc" has invalid value E1002834 AddShare: Failed to read/get option "desc".
Page 118 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E1002884 AddShare: Option "endbackup" has invalid value E1002885 AddShare: Failed to read/get option "endbackup". E1002886 AddShare: Failed to write/set option "endbackup". E1002891 AddShare: Option "namecase" requires a value E1002892 AddShare: Option "namecase"...
Page 119 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E1002942 The hour is invalid (must begin with a decimal digit)! E1002943 The minute is invalid (must begin with a decimal digit)! E1002944 The hour is out of range!
Page 120 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E1003204 ListShare: Failed to read/get option "list". E1003205 ListShare: Failed to write/set option "list". E1003211 ListShare: Option "proto" is missing. E1003212 ListShare: Option "proto" is required because another...
Page 121 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E1003612 DelShare: Option "name" requires a value E1003613 DelShare: Option "name" has invalid value E1003614 DelShare: Failed to read/get option "name". E1003615 DelShare: Failed to write/set option "name".
Page 122 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E1004403 EditShare: Option "edit" has invalid value E1004404 EditShare: Failed to read/get option "edit". E1004405 EditShare: Failed to write/set option "edit". E1004411 EditShare: Option "name" is missing.
Page 123 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E1004461 EditShare: Option "endbackup" is missing. E1004462 EditShare: Option "endbackup" requires a value E1004463 EditShare: Option "endbackup" has invalid value E1004464 EditShare: Failed to read/get option "endbackup".
Page 124 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E1004583 EditShare: Failed to read/get option "namecase". E1004584 EditShare: Failed to write/set option "namecase". E1004585 EditShare: Option "namecase" is required because another optional option is specified! E1004801 AddUser: Option "add"...
Page 125 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E1004844 AddUser: Option "gid" has invalid value E1004845 AddUser: Failed to read/get option "gid". E1004846 AddUser: Failed to write/set option "gid". E1004851 AddUser: Option "desc" is missing.
Page 126 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E1005222 ListUser: Option "namematch" has invalid value E1005223 ListUser: Failed to read/get option "namematch". E1005224 ListUser: Failed to write/set option "namematch". E1005241 ListUser failed.
Page 127 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E1006406 EditUser: Failed to write/set option "edit". E1006411 EditUser: Option "name" is missing. E1006412 EditUser: Option "name" requires a value E1006413 EditUser: Option "name" has invalid value E1006414 EditUser: Failed to read/get option "name".
Page 128 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E1006812 AddShareAdmin: Option "name" requires a value E1006813 AddShareAdmin: Option "name" has invalid value E1006814 AddShareAdmin: Failed to read/get option "name". E1006815 AddShareAdmin: Failed to write/set option "name".
Page 129 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E1008002 DeleteAllShareAdmin: Option "deleteall" requires a value E1008003 DeleteAllShareAdmin: Option "deleteall" has invalid value E1008004 DeleteAllShareAdmin: Failed to read/get option "deleteall". E1008005 DeleteAllShareAdmin: Failed to write/set option "deleteall".
Page 130 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E1008451 AddShareUser failed! E1008500 The specified user is not found on this share! E1008501 The specified user is already in share access list! E1008801 ListShareUser: Option "list"...
Page 131 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E1009226 DelShareuser: Value of option "user" is too long E1009241 DelShareUser failed! E1009601 DeleteAllShareUser: Option "deleteall" is missing. E1009602 DeleteAllShareUser: Option "deleteall" requires a value E1009603 DeleteAllShareUser: Option "deleteall"...
Page 132 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E1010022 AddShareHost: Option "host" is required because another optional option is specified! E1010023 AddShareHost: Option "host" requires a value E1010024 AddShareHost: Option "host" has invalid value E1010025 AddShareHost: Failed to read/get option "host".
Page 133 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E1010812 DelShareHost: Option "share" requires a value E1010813 DelShareHost: Option "share" has invalid value E1010814 DelShareHost: Failed to read/get option "share". E1010815 DelShareHost: Failed to write/set option "share".
Page 134 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E1014802 GetSmbsetting: Option "get" requires a value E1014803 GetSmbsetting: Option "get" has invalid value E1014804 GetSmbsetting: Failed to read/get option "get". E1014805 GetSmbsetting: Failed to write/set option "get".
Page 135 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E1014943 GetSmbsetting: Option "name" has invalid value E1014944 GetSmbsetting: Failed to read/get option "name". E1014945 GetSmbsetting: Failed to write/set option "name". E1014951 GetSmbsetting: Option "clientntlmv2auth" is missing.
Page 136 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E1015311 SetSmbsetting: Option "maxprocesses" is missing. E1015312 SetSmbsetting: Option "maxprocesses" requires a value E1015313 SetSmbsetting: Option "maxprocesses" has invalid value E1015314 SetSmbsetting: Failed to read/get option "maxprocesses".
Page 137 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E1015612 Cifs: Option "reactivate" is required because another optional option is specified! E1015613 Cifs: Failed to read/get option "reactivate". E1015614 Cifs: Failed to write/set option "reactivate".
Page 138 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E1016404 GetShare: Failed to read/get option "get". E1016405 GetShare: Failed to write/set option "get". E1016411 GetShare: Option "name" is missing. E1016412 GetShare: Option "name" requires a value E1016413 GetShare: Option "name"...
Page 139 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E1017212 AddSharesetting: Option "share" requires a value E1017213 AddSharesetting: Option "share" has invalid value E1017214 AddSharesetting: Failed to read/get option "share". E1017215 AddSharesetting: Failed to write/set option "share".
Page 140 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E1018002 ListSharesetting: Option "list" requires a value E1018003 ListSharesetting: Option "list" has invalid value E1018004 ListSharesetting: Failed to read/get option "list". E1018005 ListSharesetting: Failed to write/set option "list".
Page 141 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E1018801 NfscommitAsync: Option "nfscommit" is missing. E1018802 NfscommitAsync: Option "nfscommit" requires a value E1018803 NfscommitAsync: Option "nfscommit" has invalid value E1018804 NfscommitAsync: Failed to read/get option "nfscommit".
Page 142 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E1019613 SetNfssetting: Option "secure" has invalid value E1019614 SetNfssetting: Failed to read/get option "secure". E1019615 SetNfssetting: Failed to write/set option "secure". E1019661 SetNfssetting failed! E2000401 AddVtl: Option "add"...
Page 143 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E2000453 AddVtl: Option "drives" has invalid value E2000454 AddVtl: Failed to read/get option "drives". E2000455 AddVtl: Failed to write/set option "drives". E2000461 AddVtl: Option "dedup" is missing.
Page 144 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E2000509 Dedup must be specified E2000510 Both start and end backup window time must be specified E2000511 Error creating VTL E2000512 Unable to set dedup window...
Page 145 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E2000619 No media in unassigned VTL. E2000801 EditVtl: Option "edit" is missing. E2000802 EditVtl: Option "edit" requires a value E2000803 EditVtl: Option "edit" has invalid value E2000804 EditVtl: Failed to read/get option "edit".
Page 146 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E2000851 EditVtl: Option "startbackup" is missing. E2000852 EditVtl: Option "startbackup" is required because another optional option is specified! E2000853 EditVtl: Option "startbackup" requires a value E2000854 EditVtl: Option "startbackup"...
Page 147 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E2000914 No colon specified in Start backup time. E2000915 No colon specified in End backup time. E2000916 Unable to change backup window E2000917 Cannot change backup window...
Page 148 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E2001240 VTL not found in configuration file. E2001241 Cannot delete VTL with media in it. Remove all media before deleting VTL. E2001601 ListVtl: Option "list" is missing.
Page 149 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E2002803 ListMediatype: Option "list" has invalid value E2002804 ListMediatype: Failed to read/get option "list". E2002805 ListMediatype: Failed to write/set option "list". E2002811 ListMediatype: Option "drivetype" is missing.
Page 150 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E2003243 AddMedia: Option "barcodestart" has invalid value E2003244 AddMedia: Failed to read/get option "barcodestart". E2003245 AddMedia: Failed to write/set option "barcodestart". E2003251 AddMedia: Option "location" is missing.
Page 151 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E2003625 ListMedia: Failed to read/get option "barcode". E2003626 ListMedia: Failed to write/set option "barcode". E2003631 ListMedia: Option "all" is missing. E2003632 ListMedia: Option "all" requires a value E2003633 ListMedia: Option "all"...
Page 152 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E2004405 ExportMedia: Failed to write/set option "export". E2004411 ExportMedia: Option "barcode" is missing. E2004412 ExportMedia: Option "barcode" requires a value E2004413 ExportMedia: Option "barcode" has invalid value E2004414 ExportMedia: Failed to read/get option "barcode".
Page 153 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E2004813 RecycleMedia: Option "barcode" has invalid value E2004814 RecycleMedia: Failed to read/get option "barcode". E2004815 RecycleMedia: Failed to write/set option "barcode". E2004821 RecycleMedia: Option "name" is missing.
Page 154 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E2005225 WriteprotMedia: Failed to write/set option "name". E2005231 WriteprotMedia: Option "disable" is missing. E2005232 WriteprotMedia: Failed to read/get option "disable". E2005233 WriteprotMedia: Failed to write/set option "disable".
Page 155 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E2005703 Error turning VTL offline. E2005704 No VTL turned offline. E2006001 OnlineVtl: Option "online" is missing. E2006002 OnlineVtl: Option "online" requires a value E2006003 OnlineVtl: Option "online"...
Page 156 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E2006811 AddHost: Option "wwpn" is missing. E2006812 AddHost: Option "wwpn" requires a value E2006813 AddHost: Option "wwpn" has invalid value E2006814 AddHost: Failed to read/get option "wwpn".
Page 157 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E2007604 DelHost: Failed to read/get option "del". E2007605 DelHost: Failed to write/set option "del". E2007611 DelHost: Option "wwpn" is missing. E2007612 DelHost: Option "wwpn" requires a value E2007613 DelHost: Option "wwpn"...
Page 158 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E2008434 ListDevice: Error retrieving list of VTLs. E2008801 ListSanclientgroup: Option "list" is missing. E2008802 ListSanclientgroup: Option "list" requires a value E2008803 ListSanclientgroup: Option "list" has invalid value E2008804 ListSanclientgroup: Failed to read/get option "list".
Page 159 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E2009234 AddSanclientgroup: Failed to read/get option "wwpn". E2009235 AddSanclientgroup: Failed to write/set option "wwpn". E2009241 AddSanclientgroup: Option "target" is missing. E2009242 AddSanclientgroup: Option "target" requires a value E2009243 AddSanclientgroup: Option "target"...
Page 160 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E2009294 AddSanclientgroup: Drive device does not exists in the list of VTDs. E2009295 AddSanclientgroup: Exception caught. E2009296 AddSanclientgroup: CCL serial number is not retrieved.
Page 161 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E2010003 GetCapacity: Option "get" has invalid value E2010004 GetCapacity: Failed to read/get option "get". E2010005 GetCapacity: Failed to write/set option "get". E2010011 GetCapacity: Option "free" is missing.
Page 162 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E2010821 ListVtlstorage: Option "loc" is missing. E2010822 ListVtlstorage: Option "loc" requires a value E2010823 ListVtlstorage: Option "loc" has invalid value E2010824 ListVtlstorage: Failed to read/get option "loc".
Page 163 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E2011232 MoveMedia: Option "srctype" requires a value E2011233 MoveMedia: Option "srctype" has invalid value E2011234 MoveMedia: Failed to read/get option "srctype". E2011235 MoveMedia: Failed to write/set option "srctype".
Page 164 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E2011603 UnloadMedia: Option "unload" has invalid value E2011604 UnloadMedia: Failed to read/get option "unload". E2011605 UnloadMedia: Failed to write/set option "unload". E2011611 UnloadMedia: Option "name" is missing.
Page 165 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E2011664 UnloadMedia: Location type is invalid. E2011665 UnloadMedia: No specified media found to unload. E2011666 UnloadMedia: Error unloading media within VTL. E2011667 UnloadMedia: Unable to find first available slot.
Page 166 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E2012046 ImportMedia: One of media specified is not in the list for importing to VTL. E2012061 ImportMedia failed! E2012101 Media not in list for importing.
Page 167 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E2013601 GetIngestrate: Option "get" is missing. E2013602 GetIngestrate: Option "get" requires a value E2013603 GetIngestrate: Option "get" has invalid value E2013604 GetIngestrate: Failed to read/get option "get".
Page 168 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E3000424 ReplicateVtl: Failed to read/get option "barcode". E3000425 ReplicateVtl: Failed to write/set option "barcode". E3000426 ReplicateVtl: Option "barcode" is required because another optional option is specified! E3000431 ReplicateVtl: Option "namespace"...
Page 169 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E3000832 ReplicateNas: Failed to read/get option "disableok". E3000833 ReplicateNas: Failed to write/set option "disableok". E3000841 ReplicateNas: Option "namespace" is required because another optional option is specified! E3000842 ReplicateNas: Failed to read/get option "namespace".
Page 170 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E3001605 LockNas: Failed to write/set option "lock". E3001611 LockNas: Option "name" is missing. E3001612 LockNas: Option "name" requires a value E3001613 LockNas: Option "name" has invalid value E3001614 LockNas: Failed to read/get option "name".
Page 171 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E3002403 UnlockNas: Option "unlock" has invalid value E3002404 UnlockNas: Failed to read/get option "unlock". E3002405 UnlockNas: Failed to write/set option "unlock". E3002411 UnlockNas: Option "name" is missing.
Page 172 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E3003212 GetstatusNaslock: Option "name" requires a value E3003213 GetstatusNaslock: Option "name" has invalid value E3003214 GetstatusNaslock: Failed to read/get option "name". E3003215 GetstatusNaslock: Failed to write/set option "name".
Page 173 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E3004042 SyncNas: Deduplication is not enabled for the Share. E3004043 SyncNas: File/Directory base replication is not enabled for the Share. E3004401 GenrptReplication: Option "genrpt" is missing.
Page 174 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E3005241 GetstatusSync failed! E3005601 ListSourcerep: Option "list" is missing. E3005602 ListSourcerep: Option "list" requires a value E3005603 ListSourcerep: Option "list" has invalid value E3005604 ListSourcerep: Failed to read/get option "list".
Page 175 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E3006414 DelSourcerep: Failed to read/get option "hostid". E3006415 DelSourcerep: Failed to write/set option "hostid". E3006451 DelSourcerep: Failed to get the current source hostids. E3006452 DelSourcerep: The IP or hostname doesn't exist.
Page 176 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E3007603 DelTargetrep: Option "del" has invalid value E3007604 DelTargetrep: Failed to read/get option "del". E3007605 DelTargetrep: Failed to write/set option "del". E3007611 DelTargetrep: Option "hostid" is missing.
Page 177 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E3008033 EnablerepVtl: Failed to read/get option "cartbase". E3008034 EnablerepVtl: Failed to write/set option "cartbase". E3008041 EnablerepVtl: Option "syncid" is missing. E3008042 EnablerepVtl: Option "syncid" requires a value E3008043 EnablerepVtl: Option "syncid"...
Page 178 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E3008413 DisablerepVtl: Option "name" has invalid value E3008414 DisablerepVtl: Failed to read/get option "name". E3008415 DisablerepVtl: Failed to write/set option "name". E3008421 DisablerepVtl: Option "nodaily" is missing.
Page 179 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E3008834 EnablerepNas: Failed to write/set option "filedirbase". E3008841 EnablerepNas: Option "syncid" is missing. E3008842 EnablerepNas: Option "syncid" requires a value E3008843 EnablerepNas: Option "syncid" has invalid value E3008844 EnablerepNas: Failed to read/get option "syncid".
Page 180 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E3009222 DisablerepNas: Failed to read/get option "nodaily". E3009223 DisablerepNas: Failed to write/set option "nodaily". E3009231 DisablerepNas: Option "nofiledirbase" is missing. E3009232 DisablerepNas: Failed to read/get option "nofiledirbase".
Page 181 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E3010402 AbortrepVtl: Option "abortrep" requires a value E3010403 AbortrepVtl: Option "abortrep" has invalid value E3010404 AbortrepVtl: Failed to read/get option "abortrep". E3010405 AbortrepVtl: Failed to write/set option "abortrep".
Page 182 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E3011221 AbortsyncVtl failed! E3011601 AbortsyncNas: Option "abortsync" is missing. E3011602 AbortsyncNas: Option "abortsync" requires a value E3011603 AbortsyncNas: Option "abortsync" has invalid value E3011604 AbortsyncNas: Failed to read/get option "abortsync".
Page 183 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E3012804 EnablerepAll: Failed to read/get option "enablerep". E3012805 EnablerepAll: Failed to write/set option "enablerep". E3012821 EnablerepAll failed! E3013201 DisablerepAll: Option "disablerep" is missing. E3013202 DisablerepAll: Option "disablerep"...
Page 184 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E3014405 ListDedupnas: Failed to write/set option "list". E3014421 ListDedupnas failed! E3014451 ListDedupnas: Option "name" requires a value E3014452 ListDedupnas: Option "name" has invalid value E3014453 ListDedupnas: Value of option "name"...
Page 185 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E3015201 DisableCartrep: Option "disable" is missing. E3015202 DisableCartrep: Option "disable" requires a value E3015203 DisableCartrep: Option "disable" has invalid value E3015204 DisableCartrep: Failed to read/get option "disable".
Page 186 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E3015632 EnableFiledirrep: Failed to read/get option "locked". E3015633 EnableFiledirrep: Failed to write/set option "locked". E3015651 EnableFiledirrep: Failed to get file/directory based replication enable status.
Page 187 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E3016803 RecoverVtl: Option "recover" has invalid value E3016804 RecoverVtl: Failed to read/get option "recover". E3016805 RecoverVtl: Failed to write/set option "recover". E3016811 RecoverVtl: Option "repname" is missing.
Page 188 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E3016865 RecoverVtl: One of the barcode(s)was not found. Cartridges were recovered into the "unassigned" area. E3016866 RecoverVtl: VTL name is already being use by another VTL.
Page 189 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E3017231 DelRepvtl: Option "id" is missing. E3017232 DelRepvtl: Option "id" requires a value E3017233 DelRepvtl: Option "id" has invalid value E3017234 DelRepvtl: Failed to read/get option "id".
Page 190 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E3018033 RecoverNas: Option "id" has invalid value E3018034 RecoverNas: Failed to read/get option "id". E3018035 RecoverNas: Failed to write/set option "id". E3018041 RecoverNas: Option "recname" is missing.
Page 191 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E3018402 DelRepnas: Option "del" requires a value E3018403 DelRepnas: Option "del" has invalid value E3018404 DelRepnas: Failed to read/get option "del". E3018405 DelRepnas: Failed to write/set option "del".
Page 192 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E3018814 FailbackRepvtl: Failed to read/get option "repname". E3018815 FailbackRepvtl: Failed to write/set option "repname". E3018821 FailbackRepvtl: Option "srchost" is missing. E3018822 FailbackRepvtl: Option "srchost" requires a value E3018823 FailbackRepvtl: Option "srchost"...
Page 193 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E3019201 FailbackRepnas: Option "failback" is missing. E3019202 FailbackRepnas: Option "failback" requires a value E3019203 FailbackRepnas: Option "failback" has invalid value E3019204 FailbackRepnas: Failed to read/get option "failback".
Page 194 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E3019263 FailbackRepnas: Source host is not a valid host name or IP address. E3019264 FailbackRepnas: A failback is already in progress. E3019265 FailbackRepnas: Not allowed to replicate back to the requested target.
Page 195 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E3020412 DelVtlrecjob: Option "repname" requires a value E3020413 DelVtlrecjob: Option "repname" has invalid value E3020414 DelVtlrecjob: Failed to read/get option "repname". E3020415 DelVtlrecjob: Failed to write/set option "repname".
Page 196 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E3020824 DelNasrecjob: Failed to read/get option "srchost". E3020825 DelNasrecjob: Failed to write/set option "srchost". E3020831 DelNasrecjob: Option "id" is missing. E3020832 DelNasrecjob: Option "id" requires a value E3020833 DelNasrecjob: Option "id"...
Page 197 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E3022011 DelVtlfailbackjob: Option "repname" is missing. E3022012 DelVtlfailbackjob: Option "repname" requires a value E3022013 DelVtlfailbackjob: Option "repname" has invalid value E3022014 DelVtlfailbackjob: Failed to read/get option "repname".
Page 198 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E3022423 DelNasfailbackjob: Option "tgthost" has invalid value E3022424 DelNasfailbackjob: Failed to read/get option "tgthost". E3022425 DelNasfailbackjob: Failed to write/set option "tgthost". E3022431 DelNasfailbackjob: Option "id" is missing.
Page 199 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E3022841 AbortVtlfailbackjob: Cannot abort failback job that is not in progress. E3022851 AbortVtlfailbackjob failed! E3023201 AbortNasfailbackjob: Option "abort" is missing. E3023202 AbortNasfailbackjob: Option "abort" requires a value E3023203 AbortNasfailbackjob: Option "abort"...
Page 200 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E3023605 DownloadrptReplication: Failed to write/set option "downloadrpt". E3023611 DownloadrptReplication: There is no report to download! E3023621 DownloadrptReplication failed! E3024001 ListCartrepstats: Option "list" is missing.
Page 201 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E3024503 ListFiledirrepstats: File/Directory based replication not set on share. E3024504 ListFiledirrepstats: Exception caught. E3024801 ListCarttarget: Option "list" is missing. E3024802 ListCarttarget: Option "list" requires a value E3024803 ListCarttarget: Option "list"...
Page 202 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E3025603 EnableDro: Option "enable" has invalid value E3025604 EnableDro: Failed to read/get option "enable". E3025605 EnableDro: Failed to write/set option "enable". E3025611 EnableDro: Failed to update the DRO XML setting file.
Page 203 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E3027205 GetRepsetting: Failed to write/set option "get". E3027251 GetRepsetting failed! E3027601 SetRepsetting: Option "set" is missing. E3027602 SetRepsetting: Option "set" requires a value E3027603 SetRepsetting: Option "set"...
Page 204 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E4000050 OST: Failed to get info for list of storage servers! E4000051 OST: Failed to get storage server info! E4000052 OST: Storage server has active connections!
Page 205 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E4000432 AddStorageserver: Option "desc" is required because another optional option is specified! E4000433 AddStorageserver: Option "desc" requires a value E4000434 AddStorageserver: Option "desc" has invalid value E4000435 AddStorageserver: Failed to read/get option "desc".
Page 206 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E4000474 AddStorageserver: Option "endbackup" has invalid value E4000475 AddStorageserver: Failed to read/get option "endbackup". E4000476 AddStorageserver: Failed to write/set option "endbackup". E4000477 AddStorageserver: Failed because the maximumum storage...
Page 207 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E4000817 DelStorageserver: Failed because the storage server does not exist E4000818 DelStorageserver: Failed because the storage server has active connections. E4000819 DelStorageserver: Failed because the storage server has LSUs...
Page 208 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E4001241 EditStorageserver: Option "startbackup" is missing. E4001242 EditStorageserver: Option "startbackup" requires a value E4001243 EditStorageserver: Option "startbackup" has invalid value E4001244 EditStorageserver: Failed to read/get option "startbackup".
Page 209 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E4001613 ListStorageserver: Option "proto" requires a value E4001614 ListStorageserver: Option "proto" has invalid value E4001615 ListStorageserver: Failed to read/get option "proto". E4001616 ListStorageserver: Failed to write/set option "proto".
Page 210 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E4002023 AddLsu: Option "storageserver" has invalid value E4002024 AddLsu: Failed to read/get option "storageserver". E4002025 AddLsu: Failed to write/set option "storageserver". E4002031 AddLsu: Option "maxtransfer" is missing.
Page 211 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E4002077 AddLsu: Failed because the name _PhysicalLSU is reserved for internal use. E4002081 AddLsu failed! E4002401 DelLsu: Option "del" is missing. E4002402 DelLsu: Option "del" requires a value E4002403 DelLsu: Option "del"...
Page 212 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E4002811 EditLsu: Option "name" is missing. E4002812 EditLsu: Option "name" requires a value E4002813 EditLsu: Option "name" has invalid value E4002814 EditLsu: Failed to read/get option "name".
Page 213 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E4002862 EditLsu: Option "capacity" is required because another optional option is specified! E4002863 EditLsu: Option "capacity" requires a value E4002864 EditLsu: Option "capacity" has invalid value E4002865 EditLsu: Failed to read/get option "capacity".
Page 214 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E4003602 AddOstuser: Option "add" requires a value E4003603 AddOstuser: Option "add" has invalid value E4003604 AddOstuser: Failed to read/get option "add". E4003605 AddOstuser: Failed to write/set option "add".
Page 215 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E4004021 DelOstuser: Option "storageserver" is missing. E4004022 DelOstuser: Option "storageserver" requires a value E4004023 DelOstuser: Option "storageserver" has invalid value E4004024 DelOstuser: Value of option "storageserver" is too long E4004025 DelOstuser: Failed to read/get option "storageserver".
Page 216 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E4004816 ListOstuser: Failed to write/set option "storageserver". E4004831 ListOstuser failed! E4005201 AddOsthost: Option "add" is missing. E4005202 AddOsthost: Option "add" requires a value E4005203 AddOsthost: Option "add"...
Page 217 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E4005614 DelOsthost: Value of option "name" is too long E4005615 DelOsthost: Failed to read/get option "name". E4005616 DelOsthost: Failed to write/set option "name". E4005621 DelOsthost: Option "storageserver"...
Page 218 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E4006413 ListOsthost: Option "storageserver" has invalid value E4006414 ListOsthost: Value of option "storageserver" is too long E4006415 ListOsthost: Failed to read/get option "storageserver". E4006416 ListOsthost: Failed to write/set option "storageserver".
Page 219 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E4007651 GetOstsetting failed! E4008001 SetOstsetting: Option "set" is missing. E4008002 SetOstsetting: Option "set" requires a value E4008003 SetOstsetting: Option "set" has invalid value E4008004 SetOstsetting: Failed to read/get option "set".
Page 220 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E5000003 Node is still joining cluster (transient)! E5000004 Node is still unjoining cluster (transient)! E5000005 Cluster status is unknown! E5000006 Cluster is in diagnostic state!
Page 221 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E6000423 UpgradeFirmware: Option "user" has invalid value E6000424 UpgradeFirmware: Failed to read/get option "user". E6000425 UpgradeFirmware: Failed to write/set option "user". E6000431 UpgradeFirmware: Option "filepath" is missing.
Page 222 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E6000801 StartReclamation: Option "start" is missing. E6000802 StartReclamation: Option "start" requires a value E6000803 StartReclamation: Option "start" has invalid value E6000804 StartReclamation: Failed to read/get option "start".
Page 223 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E6002011 SchedReclamation: Option "none" is missing. E6002012 SchedReclamation: Failed to read/get option "none". E6002013 SchedReclamation: Failed to write/set option "none". E6002021 SchedReclamation: Option "daily" is missing.
Page 224 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E6002083 SchedReclamation: Option "stopDaily" has invalid value E6002084 SchedReclamation: Failed to read/get option "stopDaily". E6002085 SchedReclamation: Failed to write/set option "stopDaily". E6002091 SchedReclamation: Option "stopweekly" requires a value E6002092 SchedReclamation: Option "stopweekly"...
Page 225 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E6002414 AddLicense: Failed to read/get option "key". E6002415 AddLicense: Failed to write/set option "key". E6002431 AddLicense failed! E6002801 ListLicense: Option "list" is missing. E6002802 ListLicense: Option "list"...
Page 226 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E6003255 Nodemanage: Failed to start node as IPMI is not supported . E6003256 Nodemanage: Failed to restart node as IPMI is not supported. E6003257 Nodemanage: Invalid NodeID.
Page 227 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E6003283 Nodemanage:Invalid cluster action. E6003284 Nodemanage:Invalid cluster state. E6003285 Nodemanage:Invalid cluster role. E6003286 Nodemanage:Invalid power state. E6003287 Nodemanage:The operation is not supported. E6003288 Nodemanage:Core services failed, join not allowed.
Page 228 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E6003621 GenDiaglog: Failed to read/get option "quiet". E6003622 GenDiaglog: Failed to write/set option "quiet". E6003631 GenDiaglog: Failed to read/get option "lastgen". E6003632 GenDiaglog: Failed to write/set option "lastgen".
Page 229 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E6004801 GetstatusReclamation: Option "getstatus" is missing. E6004802 GetstatusReclamation: Option "getstatus" requires a value E6004803 GetstatusReclamation: Option "getstatus" has invalid value E6004804 GetstatusReclamation: Failed to read/get option "getstatus".
Page 230 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E6005244 GetCredential: Failed to read/get option "host". E6005245 GetCredential: Failed to write/set option "host". E6005246 GetCredential: Value of option "host" is too long E6005251 GetCredential: Option "session"...
Page 231 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E6005641 ReleaseCredential: Option "chkadmin" is required because another optional option is specified! E6005642 ReleaseCredential: Failed to read/get option "chkadmin". E6005643 ReleaseCredential: Failed to write/set option "chkadmin".
Page 232 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E6006433 Test: Failed to read/get option "opt2". E6006434 Test: Failed to write/set option "opt2". E6006441 Test: Option "opt3" requires a value E6006442 Test: Option "opt3" has invalid value E6006443 Test: Failed to read/get option "opt3".
Page 233 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E6006834 Authenticate: Value of option "client" is too long E6006835 Authenticate: Failed to read/get option "client". E6006836 Authenticate: Failed to write/set option "client". E6006841 Authenticate: Option "host"...
Page 234 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E6007602 GetError: Option "get" requires a value E6007603 GetError: Option "get" has invalid value E6007604 GetError: Failed to read/get option "get". E6007605 GetError: Failed to write/set option "get".
Page 235 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E6008044 CleanupContinuousrep: Failed to read/get option "every". E6008045 CleanupContinuousrep: Failed to write/set option "every". E6008061 CleanupContinuousrep failed! E6008401 ShowFile: Option "show" is missing. E6008402 ShowFile: Option "show"...
Page 236 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E6008811 GetParam: Option "filename" is missing. E6008812 GetParam: Option "filename" requires a value E6008813 GetParam: Option "filename" has invalid value E6008814 GetParam: Failed to read/get option "filename".
Page 237 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E6009224 SetParam: Failed to write/set option "section". E6009231 SetParam: Option "name" is missing. E6009232 SetParam: Option "name" requires a value E6009233 SetParam: Option "name" has invalid value E6009234 SetParam: Failed to read/get option "name".
Page 238 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E6009631 DelParam: Option "name" requires a value E6009632 DelParam: Option "name" has invalid value E6009633 DelParam: Failed to read/get option "name". E6009634 DelParam: Failed to write/set option "name".
Page 239 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E6012402 ResetPassword: Option "reset" requires a value E6012403 ResetPassword: Option "reset" has invalid value E6012404 ResetPassword: Failed to read/get option "reset". E6012405 ResetPassword: Failed to write/set option "reset".
Page 240 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E7000009 Failed to get email home recipients list. E7000010 No email home recipients are configured. E7000401 AddEmailrecipient: Option "add" is missing. E7000402 AddEmailrecipient: Option "add" requires a value E7000403 AddEmailrecipient: Option "add"...
Page 241 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E7000804 EditEmailrecipient: Failed to read/get option "edit". E7000805 EditEmailrecipient: Failed to write/set option "edit". E7000811 EditEmailrecipient: Option "name" is missing. E7000812 EditEmailrecipient: Option "name" requires a value E7000813 EditEmailrecipient: Option "name"...
Page 242 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E7001213 DelEmailrecipient: Option "name" has invalid value E7001214 DelEmailrecipient: Failed to read/get option "name". E7001215 DelEmailrecipient: Failed to write/set option "name". E7001231 DelEmailrecipient failed! E7001601 DeleteallEmailrecipient: Option "deleteall"...
Page 243 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E7002416 SetEmailserver: Value of option "hostname" is too long E7002421 SetEmailserver: Option "emailaddr" is missing. E7002422 SetEmailserver: Option "emailaddr" requires a value E7002423 SetEmailserver: Option "emailaddr" has invalid value E7002424 SetEmailserver: Failed to read/get option "emailaddr".
Page 244 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E7003622 SendTestemail: Option "emailaddr" requires a value E7003623 SendTestemail: Option "emailaddr" has invalid value E7003624 SendTestemail: Failed to read/get option "emailaddr". E7003625 SendTestemail: Failed to write/set option "emailaddr".
Page 245 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E7004412 SendConfigondemand: Option "emailaddr" requires a value E7004413 SendConfigondemand: Option "emailaddr" has invalid value E7004414 SendConfigondemand: Failed to read/get option "emailaddr". E7004415 SendConfigondemand: Failed to write/set option "emailaddr".
Page 246 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E7005605 GetEmailhome: Failed to write/set option "get". E7005621 GetEmailhome failed! E7006001 SetEmailhome: Option "set" is missing. E7006002 SetEmailhome: Option "set" requires a value E7006003 SetEmailhome: Option "set"...
Page 247 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E7006416 DelEmailhome: Email home recipient doesn't exist. E7006431 DelEmailhome failed! E7050401 GetDatetime: Option "get" is missing. E7050402 GetDatetime: Option "get" requires a value E7050403 GetDatetime: Option "get"...
Page 248 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E7050832 SetDatetime: Option "time" has invalid value E7050833 SetDatetime: Failed to read/get option "time". E7050834 SetDatetime: Failed to write/set option "time". E7050835 SetDatetime: Specifying both "date" and "time" options is required.
Page 249 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E7051605 ListTimezone: Failed to write/set option "list". E7051611 ListTimezone: Option "matching" requires a value E7051612 ListTimezone: Option "matching" has invalid value E7051613 ListTimezone: Failed to read/get option "matching".
Page 250 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E8000826 AddSnmptrapdest: Value of option "name" is too long E8000831 AddSnmptrapdest: Option "enable" is missing. E8000832 AddSnmptrapdest: Option "enable" requires a value E8000833 AddSnmptrapdest: Option "enable" has invalid value E8000834 AddSnmptrapdest: Failed to read/get option "enable".
Page 251 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E8001226 EditSnmptrapdest: Value of option "name" is too long E8001231 EditSnmptrapdest: Option "enable" is missing. E8001232 EditSnmptrapdest: Option "enable" requires a value E8001233 EditSnmptrapdest: Option "enable" has invalid value E8001234 EditSnmptrapdest: Failed to read/get option "enable".
Page 252 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E8002003 DeleteallSnmptrapdest: Option "deleteall" has invalid value E8002004 DeleteallSnmptrapdest: Failed to read/get option "deleteall". E8002005 DeleteallSnmptrapdest: Failed to write/set option "deleteall". E8002021 DeleteallSnmptrapdest failed! E8002401 ListSnmpcom: Option "list"...
Page 253 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E8002833 AddSnmpcom: Option "netmask" has invalid value E8002834 AddSnmpcom: Failed to read/get option "netmask". E8002835 AddSnmpcom: Failed to write/set option "netmask". E8002836 AddSnmpcom: Value of option "netmask" is too long E8002841 AddSnmpcom: Option "accesstype"...
Page 254 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E8003221 EditSnmpcom: Option "ipaddress" is missing. E8003222 EditSnmpcom: Option "ipaddress" requires a value E8003223 EditSnmpcom: Option "ipaddress" has invalid value E8003224 EditSnmpcom: Failed to read/get option "ipaddress".
Page 255 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E8003605 DelSnmpcom: Failed to write/set option "del". E8003611 DelSnmpcom: Option "name" is missing. E8003612 DelSnmpcom: Option "name" requires a value E8003613 DelSnmpcom: Option "name" has invalid value E8003614 DelSnmpcom: Failed to read/get option "name".
Page 256 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E8050011 Unable to get the list of ifcfg files. E8050012 Cannot determine if eth file belongs to a bond. E8050013 An error occurred setting the MTU to enable jumbo frames.
Page 257 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E8050037 Confignetseg: ALL_1 BONDING with no SEGMENTATION requires a BONDIP, BIPNETMASK and ETH7IP, EIP7NETMASK. E8050038 Confignetseg: ALL_1 BONDING with no SEGMENTATION requires a BIPNETMASK for BONDIP & EIP7NETMASK for ETHIP7.
Page 258 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E8050081 CliListBonds: Failed to get /sys/class/net/bondX/bonding/ slaves file! E8050082 CliListBonds: Failed to get /sys/class/net/bondX/bonding/ mode file! E8050083 CliListBonds: Failed to get bond IP info!
Page 259 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E8050412 EnableJumbo: Failed to read/get option "bond0". E8050413 EnableJumbo: Failed to write/set option "bond0". E8050421 EnableJumbo: Option "bond1" is required because another optional option is specified! E8050422 EnableJumbo: Failed to read/get option "bond1".
Page 260 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E8050822 DisableJumbo: Failed to read/get option "bond1". E8050823 DisableJumbo: Failed to write/set option "bond1". E8050831 DisableJumbo: Option "dev" requires a value E8050832 DisableJumbo: Option "dev" has invalid value E8050833 DisableJumbo: Failed to read/get option "dev".
Page 261 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E8051227 GetstatusJumbo: Option "sid" has invalid value E8051228 GetstatusJumbo: Failed to read/get option "sid". E8051229 GetstatusJumbo: Failed to write/set option "sid". E8051251 GetstatusJumbo failed! E8051252 Device specified not found.
Page 262 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E8051643 SetnetworkUnsegmented: Failed to read/get option "bondalgo". E8051644 SetnetworkUnsegmented: Failed to write/set option "bondalgo". E8051651 SetnetworkUnsegmented: Option "bond0algo" requires a value E8051652 SetnetworkUnsegmented: Option "bond0algo" has invalid...
Page 263 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E8051694 SetnetworkUnsegmented: Failed to write/set option "vipnetmask". E8051701 SetnetworkUnsegmented: Option "defaultgateway" is missing. E8051702 SetnetworkUnsegmented: Option "defaultgateway" requires a value E8051703 SetnetworkUnsegmented: Option "defaultgateway" has...
Page 264 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E8051742 SetnetworkUnsegmented: Option "dnssearchpath" has invalid value E8051743 SetnetworkUnsegmented: Failed to read/get option "dnssearchpath". E8051744 SetnetworkUnsegmented: Failed to write/set option "dnssearchpath". E8051751 SetnetworkUnsegmented: Option "vipnetmask" is required...
Page 265 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E8051776 SetNetworkUnsegmented: Failed to get "BondVIPNetmask" from network configuration file. E8051777 SetNetworkUnsegmented: Failed to get "DefaultGatewayIPAddress" seer context. E8051778 SetNetworkUnsegmented: Failed to get "DefaultGatewayIPAddress" from network configuration file.
Page 266 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E8052002 SetnetworkSegmented: Option "setnetwork" requires a value E8052003 SetnetworkSegmented: Option "setnetwork" has invalid value E8052004 SetnetworkSegmented: Failed to read/get option "setnetwork". E8052005 SetnetworkSegmented: Failed to write/set option "setnetwork".
Page 267 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E8052061 SetnetworkSegmented: Option "bond1algo" requires a value E8052062 SetnetworkSegmented: Option "bond1algo" has invalid value E8052063 SetnetworkSegmented: Failed to read/get option "bond1algo". E8052064 SetnetworkSegmented: Failed to write/set option "bond1algo".
Page 268 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E8052122 SetnetworkSegmented: Option "msgateway" has invalid value E8052123 SetnetworkSegmented: Failed to read/get option "msgateway". E8052124 SetnetworkSegmented: Failed to write/set option "msgateway". E8052131 SetnetworkSegmented: Option "rsip" is missing.
Page 269 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E8052182 SetnetworkSegmented: Option "dsgateway" has invalid value E8052183 SetnetworkSegmented: Failed to read/get option "dsgateway". E8052184 SetnetworkSegmented: Failed to write/set option "dsgateway". E8052191 SetnetworkSegmented: Option "dnsprimary" requires a value E8052192 SetnetworkSegmented: Option "dnsprimary"...
Page 270 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E8052251 SetnetworkSegmented failed! E8052252 SetNetworkSegmented: Failed to open "Network.conf" configuration file. E8052253 SetNetworkSegmented: Failed to get "NetworkSegConfigProgram" seer variable. E8052254 SetNetworkSegmented: Failed to get "Hostname" seer context.
Page 271 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E8052270 SetNetworkSegmented: Failed to get "ManagementSegmentIPAddress" from network configuration file. E8052271 SetNetworkSegmented: Failed to get "ManagementSegmentNetworkMask" seer context. E8052272 SetNetworkSegmented: Failed to get "ManagementSegmentNetworkMask" from network configuration file.
Page 272 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E8052287 SetNetworkSegmented: Failed to get "DefaultGatewayIPAddress" from network configuration file. E8052288 SetNetworkSegmented: Failed to get "DNSDomainName" from network configuration file. E8052289 SetNetworkSegmented: Failed to get "ReMessageSymlink"...
Page 273 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E8052421 QueryNetwork failed! E8052801 AddNetcfg: Option "add" is missing. E8052802 AddNetcfg: Option "add" requires a value E8052803 AddNetcfg: Option "add" has invalid value E8052804 AddNetcfg: Failed to read/get option "add".
Page 274 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E8052864 AddNetcfg: Failed to write/set option "policy". E8052871 AddNetcfg: Failed to read/get option "restart". E8052872 AddNetcfg: Failed to write/set option "restart". E8052881 AddNetcfg: Failed to read/get option "restore".
Page 275 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E8053601 ShowNetcfg: Option "show" is missing. E8053602 ShowNetcfg: Option "show" requires a value E8053603 ShowNetcfg: Option "show" has invalid value E8053604 ShowNetcfg: Failed to read/get option "show".
Page 276 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E8054851 ListEthports failed! E8054852 Sysapi_GetEthDeviceInfo failed! E8055201 ListBonds: Option "list" is missing. E8055202 ListBonds: Option "list" requires a value E8055203 ListBonds: Option "list" has invalid value E8055204 ListBonds: Failed to read/get option "list".
Page 277 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E8100104 Qnet restart services failure E8100201 Null QNet Handle E8100202 IO Error in QNet E8100203 Invalid Ethernet port. E8100204 Invalid L2EP Handle E8100205 Invalid L3EP Handle...
Page 278 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E8100803 GetHostname: Option "get" has invalid value E8100804 GetHostname: Failed to read/get option "get". E8100805 GetHostname: Failed to write/set option "get". E8100811 GetHostname: Option "sid" requires a value E8100812 GetHostname: Option "sid"...
Page 279 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E8101624 SetDns: Failed to write/set option "secondary". E8101631 SetDns: Option "tertiary" requires a value E8101632 SetDns: Option "tertiary" has invalid value E8101633 SetDns: Failed to read/get option "tertiary".
Page 280 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E8102415 ListIpaddr: Failed to write/set option "dev". E8102421 ListIpaddr: Option "sid" requires a value E8102422 ListIpaddr: Option "sid" has invalid value E8102423 ListIpaddr: Failed to read/get option "sid".
Page 281 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E8102844 SetBond: Failed to write/set option "slave". E8102845 SetBond: Option "slave" is missing. E8102851 SetBond: Option "sid" is missing. E8102852 SetBond: Option "sid" requires a value E8102853 SetBond: Option "sid"...
Page 282 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E8103603 ListEthdev: Option "list" has invalid value E8103604 ListEthdev: Failed to read/get option "list". E8103605 ListEthdev: Failed to write/set option "list". E8103611 ListEthdev: Option "sid" requires a value E8103612 ListEthdev: Option "sid"...
Page 283 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E8104412 AddRoute: Option "network" requires a value E8104413 AddRoute: Option "network" has invalid value E8104414 AddRoute: Failed to read/get option "network". E8104415 AddRoute: Failed to write/set option "network".
Page 284 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E8104501 AddRoute failed! E8104502 AddRoute: No device found to add route. E8104503 AddRoute: Invalid Gateway specified. E8104504 AddRoute: Invalid Netmask specified. E8104801 DelRoute: Option "del" is missing.
Page 285 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E8104873 DelRoute: Failed to read/get option "dest". E8104874 DelRoute: Failed to write/set option "dest". E8104875 DelRoute: Option "dest" is missing. E8104901 DelRoute failed! E8104902 DelRoute: No device found to delete route.
Page 286 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E8105252 SetNetfilter: Failed to write/set option "replace". E8105261 SetNetfilter: Option "sid" is missing. E8105262 SetNetfilter: Option "sid" requires a value E8105263 SetNetfilter: Option "sid" has invalid value E8105264 SetNetfilter: Failed to read/get option "sid".
Page 287 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E8105625 AddIpaddr: Option "gateway" requires a value E8105626 AddIpaddr: Option "gateway" has invalid value E8105627 AddIpaddr: Value of option "gateway" is too long E8105628 AddIpaddr: Failed to read/get option "gateway".
Page 288 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E8106001 DelIpaddr: Option "del" is missing. E8106002 DelIpaddr: Option "del" requires a value E8106003 DelIpaddr: Option "del" has invalid value E8106004 DelIpaddr: Value of option "del" is too long E8106005 DelIpaddr: Failed to read/get option "del".
Page 289 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E8106074 DelIpaddr: No device found for IP address deletion. E8106075 DelIpaddr: Device specified not found. E8106401 DeleteallIpaddr: Option "deleteall" is missing. E8106402 DeleteallIpaddr: Option "deleteall" requires a value E8106403 DeleteallIpaddr: Option "deleteall"...
Page 290 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E8107202 CloseSession: Option "close" requires a value E8107203 CloseSession: Option "close" has invalid value E8107204 CloseSession: Failed to read/get option "close". E8107205 CloseSession: Failed to write/set option "close".
Page 291 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E8108012 SetDnssearch: Option "path" requires a value E8108013 SetDnssearch: Option "path" has invalid value E8108014 SetDnssearch: Failed to read/get option "path". E8108015 SetDnssearch: Failed to write/set option "path".
Page 292 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E8109211 ResetNetcfg: Option "sid" requires a value E8109212 ResetNetcfg: Option "sid" has invalid value E8109213 ResetNetcfg: Failed to read/get option "sid". E8109214 ResetNetcfg: Failed to write/set option "sid".
Page 293 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E8110421 DeleteallRoute: Option "sid" requires a value E8110422 DeleteallRoute: Option "sid" has invalid value E8110423 DeleteallRoute: Failed to read/get option "sid". E8110424 DeleteallRoute: Failed to write/set option "sid".
Page 294 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E8111205 DisableDhcp: Failed to write/set option "disable". E8111211 DisableDhcp: Option "dev" is missing. E8111212 DisableDhcp: Option "dev" requires a value E8111213 DisableDhcp: Option "dev" has invalid value E8111214 DisableDhcp: Failed to read/get option "dev".
Page 295 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E9001211 AddBackupuser: Option "name" is missing. E9001212 AddBackupuser: Option "name" requires a value E9001213 AddBackupuser: Option "name" has invalid value E9001214 AddBackupuser: Value of option "name" is too long E9001215 AddBackupuser: Failed to read/get option "name".
Page 296 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E9002002 EditBackupuser: Option "edit" is missing. E9002003 EditBackupuser: Option "edit" requires a value E9002004 EditBackupuser: Option "edit" has invalid value E9002005 EditBackupuser: Failed to read/get option "edit".
Page 297 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E9002803 DeleteallBackupuser: Option "deleteall" has invalid value E9002804 DeleteallBackupuser: Failed to read/get option "deleteall". E9002805 DeleteallBackupuser: Failed to write/set option "deleteall". E9002806 DeleteallBackupuser: Unable to get backup application user list.
Page 298 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E9004006 ScanDevice: Unable to scan devices. E9004021 ScanDevice failed! E9004401 UseMedchanger: Option "use" is missing. E9004402 UseMedchanger: Option "use" requires a value E9004403 UseMedchanger: Option "use" has invalid value E9004404 UseMedchanger: Failed to read/get option "use".
Page 299 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E9004814 UseTapedrive: Failed to read/get option "sernum". E9004815 UseTapedrive: Failed to write/set option "sernum". E9004821 UseTapedrive: Option "usetype" is missing. E9004822 UseTapedrive: Option "usetype" requires a value E9004823 UseTapedrive: Option "usetype"...
Page 300 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E9005613 DisablePtt: Option "wwpn" has invalid value E9005614 DisablePtt: Failed to read/get option "wwpn". E9005615 DisablePtt: Failed to write/set option "wwpn". E9005661 DisablePtt failed!
Page 301 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E11000415 GetstatusVtlperf: Failed to write/set option "vtl". E11000431 GetstatusVtlperf failed! E11000432 GetstatusVtlperf: The specified VTL does not exist! E11000433 GetstatusVtlperf: Failed to get VTL throughput! E11000801 GetstatusTapedrive: Option "getstatus"...
Page 302 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E11001211 GetstatusStorageslot: Option "VTL" is missing. E11001212 GetstatusStorageslot: Option "VTL" requires a value E11001213 GetstatusStorageslot: Option "VTL" has invalid value E11001214 GetstatusStorageslot: Failed to read/get option "VTL".
Page 303 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E11002003 GetstatusCommoncomponent: Option "getstatus" has invalid value E11002004 GetstatusCommoncomponent: Failed to read/get option "getstatus". E11002005 GetstatusCommoncomponent: Failed to write/set option "getstatus". E11002011 GetstatusCommoncomponent: Option "storagearray" is...
Page 304 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E11002413 GetstatusEthernetswitch: Option "name" has invalid value E11002414 GetstatusEthernetswitch: Failed to read/get option "name". E11002415 GetstatusEthernetswitch: Failed to write/set option "name". E11002431 GetstatusEthernetswitch failed!
Page 305 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E11003215 GetstatusStoragearray: Failed to write/set option "name". E11003231 GetstatusStoragearray failed! E11003232 GetstatusStoragearray: Failed to read storage array status file. Caught seer exception! E11003233 GetstatusStoragearray: The storage array status file is not...
Page 306 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E11003652 GetstatusSyscomponent: Failed to read/get option "networkport". E11003653 GetstatusSyscomponent: Failed to write/set option "networkport". E11003671 GetstatusSyscomponent failed! E11003672 GetstatusSyscomponent: The file used to retrieve the status is not found.
Page 307 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E11004822 GetstatusCompadapter: Failed to compression adapter status seer file. Caught seer exception! E11004823 GetstatusCompadapter: The compression adapter status seer file is not found! E11005201 GetstatusFcadapter: Option "getstatus"...
Page 308 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E11006004 GetstatusStoragearraydetails: Failed to read/get option "getstatus". E11006005 GetstatusStoragearraydetails: Failed to write/set option "getstatus". E11006011 GetstatusStoragearraydetails: Option "name" is missing. E11006012 GetstatusStoragearraydetails: Option "name" requires a value E11006013 GetstatusStoragearraydetails: Option "name"...
Page 309 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E11006432 GetstatusEthernetswitchdetails: Failed to read Ethernet switch details. Caught seer exception! E11006433 GetstatusEthernetswitchdetails: The Ethernet switch Status seer file is not found! E11006434 GetstatusEthernetswitchdetails: The Ethernet switch does not...
Page 310 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E11007214 GetstatusFcswitchdetails: Failed to read/get option "name". E11007215 GetstatusFcswitchdetails: Failed to write/set option "name". E11007231 GetstatusFcswitchdetails failed! E11050001 Adminalert: Retrieving administration logs failed. E11050002 Adminalert: There are no items available in admin log for display.
Page 311 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E11051211 EditTicketanalysis: Option "ticketnum" is missing. E11051212 EditTicketanalysis: Option "ticketnum" requires a value E11051213 EditTicketanalysis: Option "ticketnum" has invalid value E11051214 EditTicketanalysis: Failed to read/get option "ticketnum".
Page 312 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E11052002 ListServiceticket: Option "list" requires a value E11052003 ListServiceticket: Option "list" has invalid value E11052004 ListServiceticket: Failed to read/get option "list". E11052005 ListServiceticket: Failed to write/set option "list".
Page 313 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E11052413 SendTicketanalysis: Option "ticketnum" has invalid value E11052414 SendTicketanalysis: Failed to read/get option "ticketnum". E11052415 SendTicketanalysis: Failed to write/set option "ticketnum". E11052421 SendTicketanalysis: Option "recipient" is missing.
Page 314 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E11053211 ShowTicketdetail: Option "ticketnum" is missing. E11053212 ShowTicketdetail: Option "ticketnum" requires a value E11053213 ShowTicketdetail: Option "ticketnum" has invalid value E11053214 ShowTicketdetail: Failed to read/get option "ticketnum".
Page 315 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E12050443 AnalyzeNetwork: System analysis file is already being generated. E12050801 SetNetserver: Option "set" is missing. E12050802 SetNetserver: Option "set" requires a value E12050803 SetNetserver: Option "set" has invalid value E12050804 SetNetserver: Failed to read/get option "set".
Page 316 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E12052003 ShowThroughput: Option "show" has invalid value E12052004 ShowThroughput: Failed to read/get option "show". E12052005 ShowThroughput: Failed to write/set option "show". E12052011 ShowThroughput: Option "disk" is missing.
Page 317 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E13001213 SchedHealthcheck: Failed to write/set option "never". E13001221 SchedHealthcheck: Option "time" is missing. E13001222 SchedHealthcheck: Option "time" requires a value E13001223 SchedHealthcheck: Option "time" has invalid value E13001224 SchedHealthcheck: Failed to read/get option "time".
Page 318 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E13002021 EditHealthcheck: Option "enable" is missing. E13002022 EditHealthcheck: Failed to read/get option "enable". E13002023 EditHealthcheck: Failed to write/set option "enable". E13002031 EditHealthcheck: Option "disable" is missing.
Page 319 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E80000005 Axis2: service client has no fault! E82000001 WebServices server: service not supported E82000002 WebServices server: service API not supported in this release E82000003...
Page 320 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E82001009 WebServices server: password is NULL E82002000 WebServices: failed to get credential E82002001 WebServices: failed to convert data to XML E82002002 WebServices: failed to convert data from XML...
Page 321 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 Error Code Error Message E83000107 WebServices client: credential token is NULL E83000108 WebServices client: username is NULL E83000109 WebServices client: password is NULL E83000120 WebServices client: option is not supported in Web Services!
Page 322 Quantum DXi-Series Command Line Interface (CLI) Guide 6-67081-02 Rev A July 2011 CLI Error Codes...

This manual is also suitable for:

Dxi6500 Dxi6700

Quantum DXi4500 Manual

151 CLI Syntax Conventions

Adding the CLI Directory to the Path

Replication CLI Commands

Outgoing E-Mail Server CLI Commands

Quick Links

Related Manuals for Quantum DXi4500

Summary of Contents for Quantum DXi4500

This manual is also suitable for:

Table of Contents