Table of Contents
Advertisement
Figure 6 GUI: Initial
Screen
Vertical bar
Back
ATL
P R O D U C T S
Overview
System
Off-line
ATL
ATL
Standby
Load Port
P R O D U C T S
Load Pack
U
Stop
The GUI screen consists of:
•
a horizontal bar (at the top of the screen)
a vertical bar (at the left side of the screen)
•
a main display area
•
The main display area contains a series of screens with status,
configuration, diagnostic, and operating controls. The horizontal and
vertical bars remain the same while the content of the main display
area changes.
For further information about the GUI, see chapters 3 and 4.
Front Doors
The front doors provide access to the load packs and the tape drives.
They allow you to insert and remove tape cartridges and manually
perform tape drive functions.
Warning: Before opening the front doors of the P1000, make sure the
library is in standby mode and the robotics have come to a
complete stop. Failure to do so may result in personal
injury or damage to the P1000.
ATL P1000 Series User's Guide
Operator-Accessible Components
Horizontal bar
Forward
Home
Tapes
Operator
P 1 0 0 0
Chapter 1 Library Description
Main display
area
1
9
Advertisement
Table of Contents
