Figure 27 Setup Array Menu - Quantum DXi6900 Field Service Manual

Chapter 2: Service Menus
Accessing the DXi6900 G1 Service Menu

Figure 27 Setup Array Menu

0) Save Array configurations
1) Rescan for Arrays
2) Locate an Array
3) Add an Array
4) Add an EBOD to an Array
5) Upgrade Array Firmware >>> - Download new Array Controller Firmware or NVSRAM.
6) Display Array BBU status
7) Reset Array BBU date
8) Re-enable Array tray alarms - Re-enable tray alarms on all arrays.
9) Show Premium Feature Info
10) Upload Turbo PFK file
11) Show Data Assurance Status - Show if LUNs use DA or not.
12) Show Encryption Status
13) Discover and Name Arrays
14) Reset Tray(s)
15) Show Trays Health Status
16) Show Trays Info
17) Show Tray Pools/Volumes
18) Manufacturing
42
To access the Setup Array Menu from the Hardware Configuration
Menu:
1 Type the option for Setup external Storage and press <Enter>.
The Setup Array Menu displays (see
- Save all Array configs before modifications.
- Rescan the system for connected arrays.
- Locate an RBOD in the system.
- Add an RBOD to the system.
- Add an EBOD to an existing Array.
- Display the status and age of the array BBU.
- Reset the day counter for a replaced array BBU.
- Show all installed PFK licenses.
- Install Turbo Premium Feature license.
- Show if LUNs are encrypted or not.
- Auto discover SAS attached arrays.
- Allows new Volumes to show up for in-band.
- Show Health Status for all Trays.
- Show Serial Numbers, Volumes, PFKs of all Trays.
- Show RBOD Pool(s) and Volume(s).
>>> - Tools for Manufacturing.
The Service Setup Array Menu includes the following options:
• Save Array configurations - Saves all Array module configuration
information. Use this option before making any modifications to the
Array modules.
• Rescan for Arrays - Scans for all attached Array modules.
Figure 27).
Quantum DXi6900 G1 User's Guide