Figure 51 Node Power Supply
LED
Quantum DXi6900 G1 User's Guide
Removing a Failed Power Supply from the Node
To remove the failed power supply from the DXi6900 G1 Node:
Caution: Make sure to remove the failed power supply (amber or
dark LED handle) and not the functioning power supply
(green LED handle). If you remove the functioning power
supply, power will be lost to the Node, and data loss may
occur.
1 Disconnect the power cable from the power source and the failed
power supply (see
2 Remove the power cable from the strap.
3 Press the release latch and slide the power supply out of the chassis.
Chapter 3: FRU Removal and Replacement Procedures
Figure
52).
Replacing Node Power Supplies
Power supply status
indicator/handle
97