Replacing The Integrated Storage Controller; Figure 77 Dxi6900 G1 Node Integrated Storage Controller - Quantum DXi6900 Field Service Manual

Chapter 3: FRU Removal and Replacement Procedures
Replacing the Node Integrated Storage Controller
Figure 77 DXi6900 G1 Node
Integrated Storage Controller
Replacing the
Integrated Storage
Controller
136
Illustration
This section describes how to remove and replace the integrated storage
controller in the DXi6900 G1 Node.
Caution: Use appropriate ESD precautions, including the use of a
grounding strap, when performing this procedure.
Removing and replacing the integrated storage controller in the Node
includes the following steps:
• Identifying a Failed Integrated Storage Controller
• Removing a Failed Integrated Storage Controller
• Installing a Replacement Integrated Storage Controller
• Enabling Data-at-Rest Encryption on a Replacement Integrated
Storage Controller
Identifying a Failed Integrated Storage Controller
The DXi6900 G1 Node contains an integrated storage controller (Dell
PERC H710) that supports the SAS hard drives in the Node.
To identify a failed integrated storage controller:
1 Access the remote management console (see
Management on page 25).
Description
Replacement integrated
storage controller (Dell
PERC H710)
PN FRH64
Accessing Remote
Quantum DXi6900 G1 User's Guide