Figure 141 Removing And Installing An Array Module Or Expansion - Quantum DXi6900 Field Service Manual

Figure 141 Removing and
Installing an Array Module or
Expansion Module Chassis
Front of Array or
Expansion Module
10-32 x 3/4 in. screw
Quantum DXi6900 G1 User's Guide
3 Remove the Array module or Expansion module from the rack (see
Figure 141):
a Remove the end caps from each side of the Array or Expansion
Module.
b Remove the 10-32 x 3/4 in. SEM screw with washer on each side
of the Array or Expansion Module's front panel.
Caution: Do not use excessive force when pulling the chassis
forward to fully extend the Node or Expansion Module
in the rack rails. Using excessive force could bypass the
slide rail stop mechanism.
Chapter 3: FRU Removal and Replacement Procedures
Replacing an Array or Expansion Module
221